You are here

Soheil Soghrati

  • Assistant Professor, Mechanical & Aerospace Engr
  • Assistant Professor, Materials Science Engineering
  • 201 W 19th Ave
    Columbus, OH 43210

Honors

  • 20090301

    Chester P. Siess Award.

  • 20070501

    Graduation with distinction award (1st rank), master degree.

  • 20040801

    Excellence award for 2nd rank in nationwide graduate school entrance exam.

  • 20040501

    Graduation with distinction award (1st rank), bachelor degree.

Journal Articles

2018

  • Nagaragan, A.; SOGHRATI, S., 2018, "Conforming to interface structured adaptive mesh refinement: 3D algorithm and implementation." COMPUTATIONAL MECHANICS
  • Soghrati, S.; Chen, Y.; Mai, W., 2018, "A non-iterative local remeshing approach for simulating moving boundary transient diffusion problems." Finite Elements in Analysis and Design 140, 23-37 - 23-37.
  • Taghipur, E.; Vemula, S.S.; Wang, Z.; Zhu, Y. et al., 2018, "On the mechanical behavior of electrical wires and wire bundles subject to bending loads." INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
  • Taghipour, E.; Vemula, S.S.; Wang, Z.; Zhou, Y. et al., 2018, "Characterization and computational modeling of electrical wires and wire bundles subject to bending loads." International Journal of Mechanical Sciences 140, 211-227 - 211-227.
  • Mai, W.; Soghrati, S., 2018, "New phase field model for simulating galvanic and pitting corrosion processes." Electrochimica Acta 260, 290-304 - 290-304.

2017

  • Liang, B.; Nagarajan, A.; Soghrati, S., 2017, "Numerical quantification of the impact of microstructure on the mechanical behavior of particulate Al/SiC composites in 2D." International Journal of Solids and Structures 117, 91-103 - 91-103.
  • Soghrati, S.; Xiao, F.; Nagarajan, A., 2017, "A conforming to interface structured adaptive mesh refinement for modeling fracture problems." COMPUTATIONAL MECHANICS 59,
  • Soghrati, S.; Nagarajan, A.; Liang, B., 2017, "Conforming to interface structured adaptive mesh refinement: New technique for the automated modeling of materials with complex microstructures." FINITE ELEMENTS IN ANALYSIS AND DEIGN 125,
  • Mai, W.; Soghrati, S., 2017, "A phase field model for simulating the stress corrosion cracking initiated from pits." Corrosion Science 125, 87-98 - 87-98.
  • Liang, B.; Nagarajan, A.; Hoduba, M.; Merel, R.A. et al., 2017, "Automated quantification of the impact of defects on the mechanical behavior of DNA origami nanoplates." JOURNAL OF BIOMECHANICAL ENGINEERING 140,

2016

  • SOGHRATI, S.; Liang, B., 2016, "Automated analysis of microstructural effects on the failure response of heterogeneous adhesives." INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 81, 250-261 - 250-261.
  • Soghrati, S.; Barrera, J.L., 2016, "On the application of higher-order elements in the hierarchical interface-enriched finite element method." INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING 105, no. 6,
  • Mai, W.; Soghrati, S.; Buchheit, R.G., 2016, "A phase field model for simulating the pitting corrosion." CORROSION SCIENCE 110,
  • Mai, W.; Soghrati, S.; Buchheit, R.G., 2016, "A Green's discrete transformation meshfree method for simulating transient diffusion problems." INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING 108, no. 3,
  • SOGHRATI, S.; Ahmadian, H.; Liang, B., 2016, "Mesh-independent finite element simulation of the failure response of ceramic fiber aluminum matrix composites." INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 97-98, 43-55 - 43-55.
  • Soghrati, S.; Merel, R.A., 2016, "NURBS-enhanced HIFEM: A fully mesh-indepodent method with zero geometric discretization error." FINITE ELEMENTS IN ANALYSIS AND DEIGN 120,
  • Soghrati, S.; Liang, B., 2016, "Automated analysis of microstructural effects on the failure response of heterogeneous adhesives." INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 81,
  • Ahmadian, H.; Liang, B.; Soghrati, S., 2016, "Analyzing the impact of microstructural defects on the failure response of ceramic fiber reinforced aluminum composites." International Journal of Solids and Structures 97_98, 43-55 - 43-55.

2015

  • Cuba-Ramos, A.; Aragon, A.M.; Soghrati, S.; Geubelle, P.H. et al., 2015, "A new formulation for imposing Dirichlet boundary conditions on non-matching meshes." INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING 103, no. 6,
  • Soghrati, S.; Ahmadian, H., 2015, "3D hierarchical interface-enriched finite element method: Implementation and applications." JOURNAL OF COMPUTATIONAL PHYSICS 299,
  • Soghrati, S.; Duarte, C.A.; Geubelle, P.H., 2015, "An adaptive interface-enriched generalized FEM for the treatment of problems with curved interfaces." INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING 102, no. 6,
  • Soghrati, S.; Mai, W.; Liang, B.; Buchheit, R.G., 2015, "A boundary collocation meshfree method for the treatment of Poisson problems with complex morphologies." JOURNAL OF COMPUTATIONAL PHYSICS 281,

2014

  • Soghrati, S., 2014, "Hierarchical interface-enriched finite element method: An automated technique for mesh-independent simulations." JOURNAL OF COMPUTATIONAL PHYSICS 275,
  • Soghrati, S.; Aragon, A.M.; Geubelle, P.H., 2014, "Design of actively-cooled microvascular materials: a genetic algorithm inspired network optimization." STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION 49, no. 4,

2013

  • Soghrati, S.; Najafi, A.R.; Lin, J.H.; Hughes, K.M. et al., 2013, "Computational analysis of actively-cooled 3D woven microvascular composites using a stabilized interface-enriched generalized finite element method." INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 65,
  • Soghrati, S.; Stanciulescu, I., 2013, "Systematic construction of higher order bases for the finite element analysis of multiscale elliptic problems." MECHANICS RESEARCH COMMUNICATIONS 52,
  • Aragon, A.M.; Soghrati, S.; Geubelle, P.H., 2013, "Effect of in-plane deformation on the cohesive failure of heterogeneous adhesives." JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS 61, no. 7,
  • Movahedian, B.; Boroomand, B.; Soghrati, S., 2013, "A Trefftz method in space and time using exponential basis functions; application to direct and inverse heat conduction problems." ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS 37, no. 5,

2012

  • Soghrati, S.; Thakre, P.R.; White, S.R.; Sottos, N.R. et al., 2012, "Computational modeling and design of actively-cooled microvascular materials." INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 55, no. 19-20,
  • Soghrati, S.; Aragon, A.M.; Duarte, C.A.; Geubelle, P.H., 2012, "An interface-enriched generalized FEM for problems with discontinuous gradient fields." INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING 89, no. 8,
  • Soghrati, S.; Geubelle, P.H., 2012, "A 3D interface-enriched generalized finite element method for weakly discontinuous problems with complex internal geometries." COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING 217,
  • Shahbazi, M.; Boroomand, B.; Soghrati, S., 2012, "On using exponential basis functions for laminates modeled by CLPT, FSDT and TSDT: Further tests and results." COMPOSITE STRUCTURES 94, no. 7,
  • Zandi, S.M.; Boroomand, B.; Soghrati, S., 2012, "Exponential basis functions in solution of problems with fully incompressible materials: A mesh-free method." JOURNAL OF COMPUTATIONAL PHYSICS 231, no. 21,
  • Zandi, S.M.; Boroomand, B.; Soghrati, S., 2012, "Exponential basis functions in solution of incompressible fluid problems with moving free surfaces." JOURNAL OF COMPUTATIONAL PHYSICS 231, no. 2,

2011

  • Shahbazi, M.; Boroomand, B.; Soghrati, S., 2011, "A mesh-free method using exponential basis functions for laminates modeled by CLPT, FSDT and TSDT - Part II: Implementation and results." COMPOSITE STRUCTURES 94, no. 1,
  • Shahbazi, M.; Boroomand, B.; Soghrati, S., 2011, "A mesh-free method using exponential basis functions for laminates modeled by CLPT, FSDT and TSDT - Part I: Formulation." COMPOSITE STRUCTURES 93, no. 12,

2010

  • Boroomand, B.; Soghrati, S.; Movahedian, B., 2010, "Exponential basis functions in solution of static and time harmonic elastic problems in a meshless style." INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING 81, no. 8,

Unknown

  • Liang, B.; Cuadra, J.; Hazeli, K.; SOGHRATI, S., "Image-based analysis of the stress field in an asteroidal rock subject to thermal and mechanical loadings." ICARUS
  • Liang, A.; Nagarajan, A.; Ahmadian, H.; SOGHRATI, S., "Analyzing effects of surface roughness, voids, and particle-matrix interfacial bonding on the failure response of a heterogeneous adhesive." JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
  • Yang, M.; Liang, B.; SOGHRATI, S., "New algorithms for virtual reconstruction of heterogeneous material microstructures." COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

Presentations

  • "Novel computational framework for the automated multiscale modeling of carbon fiber-reinforced polymer composites." 2017, Presented at NAFEMS Multiscale and Multiphysics Modeling and Simulation,
  • "Conforming to interface structured adaptive mesh refinement for creating conforming meshes." 2016, Presented at 24th International Congress on Theoretical and Applied Mechanics,
  • "Automated multiscale simulation of the failure response of adhesive-bonded structural joints." 2016, Presented at 24th International Congress on Theoretical and Applied Mechanics,
  • "Multiscale Simulation of Damage Progression and Failure in Adhesive-Bonded Structural Joints." 2015, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "An Advanced Computational Framework for the Automated Modeling of Materials with Complex Microstructures." 2015, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "A New Meshfree for Simulating the Pitting Corrosion Process." 2015, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "A new formulation for imposing Dirichlet boundary conditions on non-matching meshes." 2015, Presented at 13th US National Congress on Computational Mechanics,
  • "A hierarchical interface-enriched finite element method for the treatment of problems with complex geometries." 2015, Presented at 13th US National Congress on Computational Mechanics,
  • "Mesh-independent FEM for the automated treatment of problems with complex microstructures." 2015, Presented at Army Research Lab,
  • "A wireless sensor enabled virtual corrosion/fatigue inspection engine for aircrafts wiring systems." 2015, Presented at CTMA Annual Partners Meeting,
  • "Novel meshfree simulation of pitting corrosion." 2015, Presented at NACE Corrosion Conference and Expo,
  • "Mesh-independent finite element method for the automated treatment of problems with complex microstructures." 2015, Presented at Department of Materials Science Seminar Series,
  • "A Hierarchical Interface-enriched Finite Element Method for Treatment of Heterogeneous Materials Systems." 2014, Presented at 17th US National Congress on Theoretical and Applied Mechanics,
  • "A New Meshfree Method for Simulating Progressive Pitting Corrosion in Metallic Materials." 2014, Presented at 17th US National Congress on Theoretical and Applied Mechanics,
  • "Modeling the pitting corrosion of aluminum using a meshfree method." 2014, Presented at NACE Corrosion Conference and Expo,
  • "A mesh-independent finite element method for the automated modeling of advanced materials." 2013, Presented at The Ohio State University Mechanical Engineering Seminar,
  • "An interface-enriched generalized finite element method for the computational analysis and design of microvascular composites." 2013, Presented at 12th US National Congress on Computational Mechanics,
  • "Computational design of actively-cooled microvascular composites skin panels for hypersonic aircrafts." 2013, Presented at 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,
  • "An interface enriched generalized finite element method for the design of actively-cooled microvascular composites." 2013, Presented at Computer Science and Engineering Annual Meeting,
  • "A mesh-independent finite element method for design of actively cooled microvascular composites." 2013, Presented at Hopkins Extreme Materials Institute Seminar Series,
  • "Manufacturing and computational design of actively-cooled 3D woven microvascular composites." 2012, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "An interface-enriched generalized finite element method for the design of high-temperature actively-cooled composites." 2012, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "The analysis and design of actively-cooled composite panels with applications in hypersonic aircrafts." 2012, Presented at Beckman Institute for Advanced Science and Technology Seminar Series,
  • "Computational Design of Actively-Cooled 3D Woven Microvascular Glass/Epoxy Composites." 2012, Presented at 49th Annual Technical Meeting of Society of Engineering Science,
  • "An interface-based generalized finite element method for problems with discontinuous gradients." 2011, Presented at 11th US National Congress on Computational Mechanics,
  • "An interface-based generalized finite element method for the meso-scale design of high-temperature composites." 2011, Presented at 3rd International Conference on Self-Healing Materials,
  • "Active cooling of three-dimensional microvascular composites." 2011, Presented at ASME Applied Mechanics and Materials Conference,
  • "Design of microvascular networks in actively-cooled polymer matrix composites." 2011, Presented at ASME Applied Mechanics and Materials Conference,
  • "Design of microvascular materials in actively-cooled high-temperature composites." 2010, Presented at 16th US National congress of Theoretical and Applied Mechanics,
  • "On the implementation of higher order basis functions in the multiscale finite element method." 2009, Presented at 10th US National Congress on Computational Mechanics,
  • "Implementation of higher order bases in the multi-scale finite element method for elliptic problems." 2009, Presented at ASME Applied Mechanics and Materials Conference,
  • "A new meshless method for solving elasticity and plate problems using Green’s functions." 2006, Presented at 14th European Academy on Advanced Studies in Structural Engineering,
  • "Automated approach for the computational modeling of materials with complex microstructures." 2017, Presented at Engineering Mechanics Institute (EMI) Conference,
  • "Automated simulation of damage response of materials with complex microstructures." 2017, Presented at 14th U.S. National Congress on Computational Mechanics,
  • "Poster presentation: A novel phase field model for simulating pitting corrosion and stress corrosion cracking." 2017, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "Poster presentation: Automated computational framework for modeling composite materials with complex microstructures." 2017, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "A novel phase field model for simulating pitting corrosion and stress corrosion cracking." 2017, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "A novel computational framework for the automated analysis of multiscale failure response of carbon fiber reinforced polymer composites." 2017, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "Integrated computational framework for simulating the failure response of fiber reinforced composites." 2017, Presented at ASME International Mechanical Engineering Conference & Exposition,
  • "Automated simulation of multiscale failure response of materials with complex micro-structures." 2017, Presented at Ford Research and Development Center,
  • "Automated computational framework for modeling materials with complex microstructures." 2018, Presented at Wright-Patterson Air Force Research Lab,
  • "Automated computational framework for modeling materials with complex microstructures." 2018, Presented at Rice University,
  • "New integrated computational framework for modeling composite materials with intricate microstructures." 2018, Presented at North Carolina State University,
  • "Mesoscopic characterization of SVEs and macroscopic field realization for fracture and elastic properties." 2018, Presented at Engineering Mechanics Institute (EMI),
  • "Image-based multi-scale modeling of effects of microstructural features on the failure response of adhesive-bonded joints." 2018, Presented at Engineering Mechanics Institute (EMI),
  • "A conforming to interface structured adaptive mesh refinement technique for modeling complex morphologies." 2018, Presented at Engineering Mechanics Institute (EMI),
  • "New automated computational framework for simulating the mechanical behavior of nonwoven entangled materials." 2018, Presented at Engineering Mechanics Institute (EMI),
  • "Integrated computational framework for modeling materials with complex microstructures." 2018, Presented at Engineering Mechanics Institute (EMI),

Papers in Proceedings

2014

  • Najafi, A.R.; Coppola, A.; Soghrati, S.; Sottos, N.R. et al. "Microvascular composite skin panels for hypersonic aircraft." in 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. (1 2014).

2013

  • Najafi, A.R.; Soghrati, S.; Sottos, N.R.; White, S.R. et al. "Computational design of actively-cooled microvascular composites skin panels for hypersonic aircrafts." in 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. (4 2013).

2012

  • Soghrati, S.; Najafi, A.R.; Hughes, K.M.; Thakre, P.R. et al. "Computational design of actively-cooled microvascular composites for high temperature applications." in 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. (4 2012).
  • Soghrati, S.; Najafi, A.R.; Hughes, K.H.; Thakre, P.R. et al. "Computational design of actively-cooled microvascular composites for high temperature applications." (12 2012).