You are here

Michael Mills

  • McDougal Professor, Materials Science Engineering
  • 478 Watts Hall
    2041 College Rd
    Columbus, OH 43210
  • 614-292-7514

Honors

  • 2011

    Fellow of the Americn Society for Metals. .

  • 2009

    Lumley Research Award. The Ohio State University.

  • 2004

    Jacquet-Lucas Award. .

  • 2004

    Lumley Interdisciplinary Research Award. The Ohio State University.

  • 2003

    Lumley Research Award. The Ohio State University.

  • 2001

    Miller Visiting Professorship. University Of California.

  • 1999

    Warren F. Savage Award for Best Paper. .

  • 1999

    Lumley Research Award. The Ohio State University.

  • 1998

    Silver Medal. .

  • 1996

    Alexander Von Humbolt Research Fellowship.

  • 1992

    Materials Sciences Award for Outstanding Research in Metallurgy and Ceramics. .

Edited Books

2005

  • 2005. "Integrative and Interdisciplinary Aspects of Intermetallics." [unspecified]: MRS Publications.

2002

  • 2002. "Defect Properties and Related Phenomena in Intermetallic Alloys." [unspecified]: MRS Publications.

1999

  • 1999. "High Temperature Intermetallic Compounds VIII." [unspecified]: MRS Publications.

1993

  • 1993. "Defect-Interface Interactions." [unspecified]: MRS Publications.

Chapters

2010

  • M. J. Mills and G. S. Daehn. 2010. "Thermally-Activated Processes at Elevated Temperature in Metals." In Computational Methods for Microstructure-Property Relationships, edited by S. H. Ghosh and D. M. Dimiduk, [unspecified]: Springer.

2001

  • M. J. Mills and T. Neeraj. 2001. "Dislocations in Metals and Alloys." In Encyclopedia of Materials Science and Technology, edited by K. H. J. Buschow, R. W. Cahn, M. C. Flemings, B. Ilschner, E. J. Kramer and S. Mahajan, 2278 - 2291. [unspecified]: Elsevier Science Ltd..

1996

  • D. C. Chrzan and M. J. Mills. 1996. "Dynamics of Dislocation Motion in L12 Compounds." In Dislocations in Solids, edited by F. R. N. Nabarro and M. S. Duesbery, 187 - [unspecified]: Elsevier Publications.

1991

  • M. J. Mills, D. C. Chrzan, K. J. Hemker and W. D. Nix. 1991. "Modeling of Anomalous Flow in Intermetallic Compounds with the L12 Structure." In Modeling the Deformation in Crystalline Solids, edited by T. Lowe and A. Rollett, P. Follansbee and G. S. Daehn, 423 - [unspecified]: TMS Publications.

1989

  • M. J. Mills. 1989. "Simulation of Thin-Foil Effects on High Resolution TEM Images of Dislocation Cores in Metals." In Simulation of Electron Diffraction and Images, edited by W. A. Krakow and M. A. O’Keefe, 210 - [unspecified]: The Metallurgical Society.

Journal Articles

2014

  • Carter,Jennifer,LW; Kuper,Michael,W; Uchic,Michael,D; Mills,Michael,J, 2014, "Characterization of localized deformation near grain boundaries of superalloy Rene-104 at elevated temperature." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 605, 127 - 136.
  • Grassman,T,J; Carlin,J,A; Galiana,B; Yang,F; Mills,M,J; Ringel,S,A, 2014, "MOCVD-Grown GaP/Si Subcells for Integrated III-V/Si Multijunction Photovoltaics." IEEE JOURNAL OF PHOTOVOLTAICS 4, no. 3, 972 - 980.
  • Francis,E,M; Grant,B,MB; da Fonseca,J,Quinta; Phillips,P,J; Mills,M,J; Daymond,M,R; Preuss,M, 2014, "High-temperature deformation mechanisms in a polycrystalline nickel-base superalloy studied by neutron diffraction and electron microscopy." ACTA MATERIALIA 74, 18 - 29.
  • Bowers,M,L; Chen,X; De Graef,M; Anderson,P,M; Mills,M,J, 2014, "Characterization and modeling of defects generated in pseudoelastically deformed NiTi microcrystals." SCRIPTA MATERIALIA 78-79, 69 - 72.
  • Zhou,N; Lv,D,C; Zhang,H,L; McAllister,D; Zhang,F; Mills,M,J; Wang,Y, 2014, "Computer simulation of phase transformation and plastic deformation in IN718 superalloy: Microstructural evolution during precipitation." ACTA MATERIALIA 65, 270 - 286.

2013

  • Phillips,P,J; Mills,M,J, 2013, "Fine-scale structure of dislocations and debris in deformed Ni-based superalloy R104." PHILOSOPHICAL MAGAZINE 93, no. 1-3, 82 - 95.
  • Kwon,J; BRANDES,M,C; Phani,P,Sudharshan; Pilchak,A,P; Gao,Y,F; George,E,P; Pharr,G,M; Mills,M,J, 2013, "Characterization of deformation anisotropies in an alpha-Ti alloy by nanoindentation and electron microscopy." ACTA MATERIALIA 61, no. 13, 4743 - 4756.
  • Yang,F; COUGHLIN,D,R; Phillips,P,J; Yang,L; Devaraj,A; Kovarik,L; Noebe,R,D; Mills,M,J, 2013, "Structure analysis of a precipitate phase in an Ni-rich high-temperature NiTiHf shape memory alloy." ACTA MATERIALIA 61, no. 9, 3335 - 3346.
  • Payton,E,J; Wang,G; Mills,M,J; Wang,Y, 2013, "Effect of initial grain size on grain coarsening in the presence of an unstable population of pinning particles." ACTA MATERIALIA 61, no. 4, 1316 - 1326.
  • Yang,F; Noebe,R,D; Mills,M,J, 2013, "Precipitates in a near-equiatomic (Ni plus Pt)-rich TiNiPt alloy." SCRIPTA MATERIALIA 69, no. 10, 713 - 715.
  • Grassman,T,J; Carlin,J,A; Galiana,B; Yang,L-M; Yang,F; Mills,M,J; Ringel,S,A, 2013, "Nucleation-related defect-free GaP/Si(100) heteroepitaxy via metal-organic chemical vapor deposition." APPLIED PHYSICS LETTERS 102, no. 14, 142102 -
  • Yang,J; Yang,F; Kent,T,F; Mills,M,J; Myers,R,C, 2013, "Semipolar InN/AlN multiple quantum wells on {10(1)over-bar5} faceted AlN on silicon." APPLIED PHYSICS LETTERS 103, no. 12, 121105 -
  • Morrow,B,M; Kozar,R,W; Anderson,K,R; Mills,M,J, 2013, "An examination of the use of the Modified Jogged-Screw model for predicting creep behavior in Zircaloy-4." ACTA MATERIALIA 61, no. 12, 4452 - 4460.
  • Laskar,Masihhur,R; Carnevale,Santino,D; Sarwar,A,TMGolam; Phillips,Patrick,J; Mills,Michael,J; Myers,Roberto,C, 2013, "Molecular Beam Epitaxy of Graded-Composition InGaN Nanowires." JOURNAL OF ELECTRONIC MATERIALS 42, no. 5, 863 - 867.
  • Dimiduk,D,M; Uchic,M,D; Rao,S,I; Shade,P,A; Woodward,C; Viswanathan,G,B; Nadgorny,E,M; Polasik,S; Norfleet,D,M; Mills,M,J, 2013, "Strengthening and plastic flow of Ni3Al alloy microcrystals." PHILOSOPHICAL MAGAZINE 93, no. 1-3, 96 - 120.
  • Acar,E; Karaca,H,E; Basaran,B; Yang,F; Mills,M,J; Noebe,R,D; Chumlyakov,Y,I, 2013, "Role of aging time on the microstructure and shape memory properties of NiTiHfPd single crystals." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 573, 161 - 165.

2012

  • Phillips,P,J; McAllister,D; Gao,Y; Lv,D; Williams,R,EA; Peterson,B; Wang,Y; Mills,M,J, 2012, "Nano gamma '/gamma '' composite precipitates in Alloy 718." APPLIED PHYSICS LETTERS 100, no. 21, 211913 -
  • Carnevale,S,D; Marginean,C; Phillips,P,J; Kent,T,F; Sarwar,A,TMG; Mills,M,J; Myers,R,C, 2012, "Coaxial nanowire resonant tunneling diodes from non-polar AlN/GaN on silicon." APPLIED PHYSICS LETTERS 100, no. 14, 142115 -
  • Phillips,P,J; De Graef,M; Kovarik,L; Agrawal,A; Windl,W; Mills,M,J, 2012, "Atomic-resolution defect contrast in low angle annular dark-field STEM." ULTRAMICROSCOPY 116, 47 - 55.
  • Coughlin,D,R; Phillips,P,J; BIGELOW,G,S; Garg,A; Noebe,R,D; Mills,M,J, 2012, "Characterization of the microstructure and mechanical properties of a 50.3Ni-29.7Ti-20Hf shape memory alloy." SCRIPTA MATERIALIA 67, no. 1, 112 - 115.
  • Kent,T,F; Yang,J; Yang,L; Mills,M,J; Myers,R,C, 2012, "Epitaxial ferromagnetic nanoislands of cubic GdN in hexagonal GaN." APPLIED PHYSICS LETTERS 100, no. 15, 152111 -
  • Brandes,M,C; Baughman,M; Mills,M,J; Williams,J,C, 2012, "The effect of oxygen and stress state on the yield behavior of commercially pure titanium." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 551, 13 - 18.
  • Walley,J,L; Wheeler,R; Uchic,M,D; Mills,M,J, 2012, "In-Situ Mechanical Testing for Characterizing Strain Localization During Deformation at Elevated Temperatures." EXPERIMENTAL MECHANICS 52, no. 4, 405 - 416.
  • Li,Yi-Yun; Kovarik,Libor; Phillips,Patrick,J; Hsu,Yung-Fu; Wang,Wen-Hsiung; Mills,Michael,J, 2012, "High-resolution characterization of the precipitation behavior of an Al-Zn-Mg-Cu alloy." PHILOSOPHICAL MAGAZINE LETTERS 92, no. 4, 166 - 178.
  • Brandes,M,C; Kovarik,L; Miller,M,K; Mills,M,J, 2012, "Morphology, structure, and chemistry of nanoclusters in a mechanically alloyed nanostructured ferritic steel." JOURNAL OF MATERIALS SCIENCE 47, no. 8, 3913 - 3923.
  • Gao,Y; Zhou,N; Yang,F; Cui,Y; Kovarik,L; Hatcher,N; Noebe,R; Mills,M,J; Wang,Y, 2012, "P-phase precipitation and its effect on martensitic transformation in (Ni,Pt)Ti shape memory alloys." ACTA MATERIALIA 60, no. 4, 1514 - 1527.
  • Carnevale,Santino,D; Kent,Thomas,F; Phillips,Patrick,J; Mills,Michael,J; Rajan,Siddharth; Myers,Roberto,C, 2012, "Polarization-Induced pn Diodes in Wide-Band-Gap Nanowires with Ultraviolet Electroluminescence." NANO LETTERS 12, no. 2, 915 - 920.
  • Vorontsov,V,A; Kovarik,L; Mills,M,J; Rae,C,MF, 2012, "High-resolution electron microscopy of dislocation ribbons in a CMSX-4 superalloy single crystal." ACTA MATERIALIA 60, no. 12, 4866 - 4878.
  • Brandes,M,C; Kovarik,L; Miller,M,K; Daehn,G,S; Mills,M,J, 2012, "Creep behavior and deformation mechanisms in a nanocluster strengthened ferritic steel." ACTA MATERIALIA 60, no. 4, 1827 - 1839.
  • Manchuraju,S; Kroeger,A; Somsen,C; Dlouhy,A; Eggeler,G; Sarosi,P,M; Anderson,P,M; Mills,M,J, 2012, "Pseudoelastic deformation and size effects during in situ transmission electron microscopy tensile testing of NiTi." ACTA MATERIALIA 60, no. 6-7, 2770 - 2777.
  • Kovarik,L; Mills,M,J, 2012, "Ab initio analysis of Guinier-Preston-Bagaryatsky zone nucleation in Al-Cu-Mg alloys." ACTA MATERIALIA 60, no. 9, 3861 - 3872.
  • Payton,E,J; Wynn,T,A; Mills,M,J, 2012, "Experimental measurement of the kinetics of gamma prime dissolution during supersolvus heat treatment of powder metallurgical Ni-based disk superalloys." JOURNAL OF MATERIALS SCIENCE 47, no. 20, 7305 - 7311.
  • Karaca,H,E; Acar,E; Basaran,B; Noebe,R,D; Bigelow,G; Garg,A; Yang,F; Mills,M,J; Chumlyakov,Y,I, 2012, "Effects of aging on [111] oriented NiTiHfPd single crystals under compression." SCRIPTA MATERIALIA 67, no. 7-8, 728 - 731.
  • Yang,F; Kovarik,L; Phillips,P,J; Noebe,R,D; Mills,M,J, 2012, "Characterizations of precipitate phases in a Ti-Ni-Pd alloy." SCRIPTA MATERIALIA 67, no. 2, 145 - 148.

2011

  • Phillips,P,J; BRANDES,M,C; Mills,M,J; De Graef,M, 2011, "Diffraction contrast STEM of dislocations: Imaging and simulations." ULTRAMICROSCOPY 111, no. 9-10, 1483 - 1487.
  • Nagpure,Shrikant,C; Babu,S,S; Bhushan,Bharat; Kumar,Ashutosh; Mishra,Rohan; Windl,Wolfgang; Kovarik,L; Mills,Michael, 2011, "Local electronic structure of LiFePO4 nanoparticles in aged Li-ion batteries." ACTA MATERIALIA 59, no. 18, 6917 - 6926.
  • Wang,G; Xu,D,S; Payton,E,J; Ma,N; Yang,R; Mills,M,J; Wang,Y, 2011, "Mean-field statistical simulation of grain coarsening in the presence of stable and unstable pinning particles." ACTA MATERIALIA 59, no. 11, 4587 - 4594.
  • Unocic,R,R; Zhou,N; Kovarik,L; Shen,C; Wang,Y; Mills,M,J, 2011, "Dislocation decorrelation and relationship to deformation microtwins during creep of a gamma ' precipitate strengthened Ni-based superalloy." ACTA MATERIALIA 59, no. 19, 7325 - 7339.
  • Swaminathan,K; Yang,L-M; Grassman,T,J; Tabares,G; Guzman,A; Hierro,A; Mills,M,J; Ringel,S,A, 2011, "Metamorphic In0.20Ga0.80As p-i-n photodetectors grown on GaAs substrates for near infrared applications." OPTICS EXPRESS 19, no. 8, 7280 - 7288.
  • Lienert,U; Li,S,F; Hefferan,C,M; Lind,J; Suter,R,M; Bernier,J,V; Barton,N,R; BRANDES,M,C; Mills,M,J; Miller,M,P; Jakobsen,B; Pantleon,W, 2011, "High-energy diffraction microscopy at the advanced photon source." JOM 63, no. 7, 70 - 77.
  • Narayanan,B,K; Kovarik,L; Quintana,M,A; Mills,M,J, 2011, "Characterisation of ferritic weld microstructures using various electron microscopy techniques: a review." SCIENCE AND TECHNOLOGY OF WELDING AND JOINING 16, no. 1, 12 - 22.
  • Swaminathan,K; Grassman,T,J; Yang,L-M; Gu,Q; Mills,M,J; Ringel,S,A, 2011, "Optically-aligned visible/near-infrared dual-band photodetector materials and devices on GaAs using metamorphic epitaxy." JOURNAL OF APPLIED PHYSICS 110, no. 6, 063109 -
  • Zhou,Ning; Shen,Chen; Mills,Michael,J; Li,Ju; Wang,Yunzhi, 2011, "Modeling displacive-diffusional coupled dislocation shearing of gamma ' precipitates in Ni-base superalloys." ACTA MATERIALIA 59, no. 9, 3484 - 3497.
  • V. Sinha, M.J. Mills, and J.C. Williams, 2011, "Determination of Crystallographic Orientation of Dwell-fatigue Fracture Facets in Ti-6242 Alloy." Journal of Materials Science
  • Phillips,P,J; Mills,M,J; De Graef,M, 2011, "Systematic row and zone axis STEM defect image simulations." PHILOSOPHICAL MAGAZINE 91, no. 16, 2081 - 2101.
  • Payton,E,J; Mills,M,J, 2011, "Stereology of backscatter electron images of etched surfaces for characterization of particle size distributions and volume fractions: Estimation of imaging bias via Monte Carlo simulations." MATERIALS CHARACTERIZATION 62, no. 6, 563 - 574.
  • Kovarik,L; Mills,M,J, 2011, "Structural relationship between one-dimensional crystals of Guinier-Preston-Bagaryatsky zones in Al-Cu-Mg alloys." SCRIPTA MATERIALIA 64, no. 11, 999 - 1002.
  • Carnevale,Santino,D; Yang,Jing; Phillips,Patrick,J; Mills,Michael,J; Myers,Roberto,C, 2011, "Three-Dimensional GaN/AIN Nanowire Heterostructures by Separating Nucleation and Growth Processes." NANO LETTERS 11, no. 2, 866 - 871.

2010

  • K.A. Unocic, R.W. Hayes, M.J. Mills and G.S. Daehn, 2010, "Microstructural Features Leading to Enhanced Grain Boundary Creep Cracking in ALLVAC 718Plus." Metall. Trans. A 41A, 409 - 420.
  • E. J. Payton, P.J. Phillips and M.J. Mills, 2010, "Semi-automated characterization of the ï�§â€™ phase in Ni-based superalloys via high-resolution backscatter imaging." Mater. Sci. Eng. A 527, 2684 - 2692.
  • Zhou,Ning; Shen,Chen; Mills,Michael; Wang,Yunzhi, 2010, "Large-scale three-dimensional phase field simulation of gamma '-rafting and creep deformation." PHILOSOPHICAL MAGAZINE 90, no. 1-4, 405 - 436.
  • P.J. Phillips, R. R. Unocic, L. Kovarik, D. Mourer, D. Wei and M.J. Mills, 2010, "Low Cycle Fatigue of a Ni-based Superalloy: Non-Planar Deformation." Scripta Mater 62, 790 - 793.
  • B.K. Narayanan, L. Kovarik, P.M. Sarosi, M.A. Quintana, M.J. Mills, 2010, "Effect of Micro-Alloying on Precipitate Evolution in Ferritic Welds and Implications for Toughness." Acta Mater 58, 781 - 791.
  • L. Kovarik, F. Yang, A. Garg, D. Diercks, M. Kaufman, R.D. Noebe, and M.J. Mills, 2010, "Structural Analysis of a New Precipitate Phase in High-Temperature Ti50Ni30Pt20 Shape Memory Alloys." Acta Mater 58, 4660 - 4673.
  • T. J. Grassman, M. R. Brenner, A. M. Carlin, S. Rajagopalan, R. Unocic, R. Dehoff, M. Mills, H. Fraser, S. A. Ringel, 2010, "Characterization of Metamorphic GaAsP/Si Materials and Devices for Photovoltaic Applications." IEEE Transactions on Electronic Devices 57, 3361 - 3369.
  • Zhou,N; Shen,C; Wagner,MF,X; Eggeler,G; Mills,M,J; Wang,Y, 2010, "Effect of Ni4Ti3 precipitation on martensitic transformation in Ti-Ni." ACTA MATERIALIA 58, no. 20, 6685 - 6694.

2009

  • G. Wang, D.S. Xu, N. Ma, N. Zhou, E.J. Payton, R. Yang, M.J. Mills, Y. Wang, 2009, "Simulation study of effects of initial particle size distribution on dissolution." Acta Materialia 57, 316 - 325.
  • T. J. Grassman, M. R. Brenner, A. M. Carlin, S. Rajagopalan, R. Unocic, R. Dehoff, M. Mills, H. Fraser, S. A. Ringel, 2009, "Control and elimination of nucleation-related defects in GaP/Si(001) heteroepitaxy." Applied Physics Letters 95, 232106 -
  • U. Lienert, M.C. Brandes, J.V. Bernier, J.Weiss, S.D. Shastri, M.J. Mills, M.P. Miller, 2009, "In situ single-grain peak profile measurements on Ti–7Al during tensile Deformation." Mater. Sci. Eng. A 524, 46 - 54.
  • J.H. Moon, S. Karthikeyan, B.M. Morrow, S.P. Fox and M.J. Mills, 2009, "High-temperature creep behavior and microstructure analysis of binary Ti-6Al alloys with trace amounts of Ni." Mater. Sci. Eng. A 510-511, 35 - 41.
  • L. Kovarik, R.R. Unocic, J. Li, P.Sarosi, C. Shen, Y. Wang and M.J. Mills, 2009, "Microtwinning and Other Shearing Mechanisms In Ni Base Superalloys at Intermediate Temperatures." Prog. Mater. Sci 54, 839 - 873.
  • D.M. Norfleet, P.M. Sarosi, M. C. Uchic, M. F.-X. Wagner, S. Manchiraju, P. M. Anderson and M. J. Mills, 2009, "Transformation-Induced Plasticity During Pseudo-Elastic Deformation in Ni-Ti Microcrystals." Acta Mater 57, 3549 - 3561.
  • J.H. Schneibel, C.T. Liu, M.K. Miller, M.J. Mills, 2009, "Ultrafine-grained nanocluster-strengthened alloys with unusually high creep strength." Scripta Materialia 61, 793 - 796.

2008

  • D.M. Norfleet, D.M. Dimiduk, S.J. Polasik, M.D. Uchic, M.J. Mills, 2008, "Dislocation structures and their relationship to strength in deformed nickel microcrystals." Acta Mater 56, 2988 - 3001.
  • R.R. Unocic, G.B. Viswanathan, P.M. Sarosi, S. Karthikeyan, M.J. Mills, 2008, "Mechanisms of Creep Deformation in Polycrystalline Ni-Base Disk Superalloys." Materials Science and Engineering A 483, 25 - 32.
  • R.R. Unocic, L. Kovarik, C. Shen, P.M. Sarosi, Y. Wang, J. Li, S. Ghosh and M.J. Mills, 2008, "Deformation Mechanisms in Ni-based Disk Superalloys at Higher Temperatures." Superalloys 2008 377 - 386.
  • E. Payton, G. Wang, G. Wang, N. Ma, Y. Wang, M. Mills, D. Whitis, D. Mourer and D. Wei, 2008, "Integration of simulations and experiments for modeling superalloy grain growth." Superalloys 2008 975 - 985.
  • L. Kovarik, S. A. Court, H.L. Fraser, M. J. Mills, 2008, "Composite GPB/GPBII zones in Al-Cu-Mg alloys." Acta Materialia 56, 4804 - 4815.
  • L. Kovarik, RR. Unocic, J. Li and M. J. Mills, 2008, "The Intermediate Temperature Deformation of Ni-Based Superalloys: The Importance of Reordering." J. of Metals (JOM) 61, 56 - 62.
  • M. Kappes, L. Kovarik, M. J. Mills, G. S. Frankel, 2008, "The Usefulness of Ultra-High Resolution Microstructural Studies for Understanding Localized Corrosion Behavior of Al Alloys." J. Electrochem. Soc 155, C437 - C443.
  • N. Zhou, C. Shen, M. J. Mills and Y. Wang, 2008, "Phase Field Modeling of the Effect of Elastic Modulus Misfit on Rafting of a Model Single Crystal Superalloy." Acta mater 56, 6156 - 6173.
  • N. Zhou, C. Shen, M.J. Mills, P.M. Sarosi, M.J. Mills, Y. Wang, T. Pollock, 2008, "ï�§ï‚¢ Rafting in Single Crystal Blade Alloys – A Simulation Study." SuperAlloys 2008
  • Hayashi T, Sarosi P M, Schneibel J H, Mills M J, 2008, "Creep response and deformation processes in nanocluster-strengthened ferritic steels." Acta Mater 56, 1407 - 1416.

2007

  • Schneibel J H, Liu C T, Hoelzer D T, Mills M J, Sarosi P, Hayashi T, Wendt U and Heyse H, 2007, "Development of porosity in an oxide dispersion-strengthened ferritic alloy containing nanoscale oxide particles." Scripta Materialia 57, 1040 - 1043.
  • Venkatramani G, Ghosh S, Mills M, 2007, "A size-dependent crystal plasticity finite-element model for creep and load shedding in polycrystalline titanium alloys." Acta mater 55, 3971 - 3986.
  • N. Zhou, C. Shen, M. J. Mills and Y. Wang, 2007, "Phase Field Modeling of Channel Dislocation Activity and ï�§' Rafting in Single Crystal Ni-Al." Acta mater 55, 5369 - 5381.

2006

  • J. H. Moon, P. E. Cantonwine, K. R. Anderson, S. Karthikeyan and M. J. Mills, 2006, "Characterization and Modeling of Creep in Zircaloy-4." J. Nucl. Mater 353, 177 - 189.
  • L. Kovarik, M.K. Miller, S.A. Court, M.J. Mills, 2006, "Origin of the Modified Orientation Relationship for S(Sâ€�)- phase in Al-Cu-Mg Alloys." Acta Materialia 54, 1731 - 1740.
  • K. A. Unocic, P. Kobe P, M. J. Mills and G. S. Daehn and M. J. Mills, 2006, "Grain boundary precipitate modification for improved intergranular corrosion resistance." Mater. Sci. Forum 327-332, 519 - 521.
  • G.B. Viswanathan, S. Karthikeyan, P.M. Sarosi, R.R. Unocic, M.J. Mills, 2006, "Microtwinning During Intermediate Temperature Creep of Polycrystalline Ni-Base Superalloys: Mechanisms and Modeling." Phil. Mag 86, no. 29-31, 4823 - 4840.
  • V. Sinha, M.J. Mills, and J.C. Williams, 2006, "Crystallography of Fracture Facets in a Near-alpha Titanium Alloy." Metallurgical and Materials Transactions A 37A, 2015 - 2026.
  • C. Harris, R. Tedstrom, M. S. Daw and M. J. Mills, 2006, "Calculations of diffusion and diffusion-limited processes in Ni3Al using accelerated molecular dynamics." Comp. Mater. Sci 37, 462 - 469.
  • M. J. Mills, N. L. Baluc and P. M. Sarosi, 2006, "HRTEM of Dislocation Cores and Thin-Foil Effects in Metals and Intermetallic Compounds." Micr. Res. and Tech 69, 317 - 329.
  • G.B. Viswanathan, S. Karthikeyan, P.M. Sarosi, R.R. Unocic, and M.J. Mills, 2006, "Microtwinning During Intermediate Temperature Creep of Polycrystalline Ni-base Superalloys: Mechanisms and Modeling." Philosophical Magazine 86, 4823 - 4840.
  • D. Deka, D. S. Joseph, S. Ghosh and M. J. Mills, 2006, "Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242." Metall. Mater. Trans. A 37A, 1371 - 1388.
  • V. Sinha, R.B. Schwarz, M.J. Mills, and J.C. Williams, 2006, "Influence of Hydrogen Content on the Dwell Fatigue Behavior of Ti-6242 Alloy." Metallurgical and Materials Transactions A 37A, 2015 - 2026.
  • V. Sinha, J.E. Spowart, M.J. Mills, and J.C. Williams, 2006, "Observations on the Faceted Initiation Site in the Dwell-Fatigue Tested Ti-6242 alloy: Crystallographic Orientation and Size Effects." Metallurgical and Materials Transactions A 37A, 1507 - 1518.
  • P. M. Sarosi, G. B. Viswanathan, M. J. Mills, 2006, "Direct observation of an extended complex stacking fault in the gamma' phase of a Ni-base superalloy." Scripta Mater 55, 727 - 730.
  • S. Karthikeyan, R.R. Unocic, P.M. Sarosi, G.B. Viswanathan, and M.J. Mills, 2006, "Modeling Microtwinning During Creep in Ni-based Superalloys." Scripta Materialia 54, no. 6, 1157 - 1162.

2005

  • G. B. Viswanathan, P. Sarosi, D. Whitis, M. F. Henry and M. J. Mills, 2005, "Investigation of Creep Deformation Mechanisms at Intermediate Temperatures in René 88 DT Superalloys." Acta Mater 53, 3041 - 3057.
  • P M Sarosi, G B Viswanathan, D Whitis. and M J Mills, 2005, "Imaging and characterization of fine gamma-prime precipitates in commercial nickel-based superalloys." Ultramicroscopy 103, 83 - 93.
  • R.R. Unocic, P.M. Sarosi, and M.J. Mills, 2005, "EFTEM Imaging of Ultra Fine Scaled ï�§ï‚¢ Precipitates in Nickel Based Superalloys." Advanced Materials & Processes 163, no. 7, 50 - 51.
  • T. Neeraj,; M. F Savage; J.;Tatalovich,; L Kovarik; R. W Hayes; M. J. Mills, 2005, "Observation of tension-compression asymmetry in and titanium alloys." Phil Mag 85, no. 2-3, 279 - 295.
  • S. Karthikeyan, J. H. Moon, G. B. Viswanathan and M. J. Mills, 2005, "Modelling Creep Controlled by the Glide of Jogged Screw Dislocations in TiAl and Ti-Based Alloys." Diffusion in. Solids Forum 127 -

2004

  • L. Kovarik, P. I. Gouma, C. Kisielowski, S. A. Court, M. J. Mills, 2004, "High Resolution Transmission Electron Microscopy Study of the Early Stages of Aging in Al-Mg-Cu-Si Alloys." Acta Mater 52, 2509 - 2520.
  • L. Reissig, R. Volkl, M. J. Mills, et al, 2004, "Investigation of Near Surface Structure in Order to Determine Process-Temperatures During Different Machining Processes of Ti6A14V." Scripta Mater 50, 121 - 126.
  • S. Karthikeyan, G. B. Viswanathan and M. J. Mills, 2004, "Evaluation of the Jogged-Screw Model of Creep in Equiaxed ï�§-TiAl: Identification of the Key Substructural Parameters." Acta Mater 52, 2577 - 2598.
  • M. F. Savage, J. Tatalovich and M. J. Mills, 2004, "Anisotropy in the Room Temperature Deformation of ï�¡ï€¯ï�¢ Colonies in Titanium Alloys: The Role of the ï�¡ï€¯ï�¢ Interface." Phil Mag A 84, no. 11, 1127 - 1154.
  • Kovarik, L.; Gouma, P. I.; Kisielowski, C.; Court, S. A.; Mills, M. J., 2004, "Decomposition of an Al-Mg-Cu alloy - a high resolution transmission electron microscopy investigation." Mat. Sci. Eng. A A387-A389, 326 - 330.
  • J. Deslippe, R. Tedstrom, and M. S. Daw, D. C. Chrzan, M. J. Mills and T. Neeraj, 2004, "Dynamical scaling in a simple 1-D model of dislocation activity." Phil. Mag. A 84, 2445 - 2454.
  • P. M. Sarosi, G. B. Viswanathan, D. Whitis and M. J. Mills, 2004, "Imaging and Characterization of g Precipitates in Nickel-Based superalloys." Superalloys 2004 989 - 996.
  • M. Brandes and M. J. Mills, 2004, "Static Recovery in Titanium Alloys at Lower Temperatures." Mat. Sci. Eng. A,-Struct 87-89, 570 - 575.
  • V. Sinha, M. J. Mills and J. C. Williams, 2004, "Understanding the Contributions of Normal-Fatigue and Static Loading to the Dwell Fatigue in a Near-Alpha Titanium Alloy." Metall. Mater. Trans A 35, 3141 - 3148.
  • G. B. Viswanathan, P. M. Sarosi, M. Henry, D. Whitis and M. J. Mills, 2004, "Deformation Mechanisms at Intermediate Creep Temperatures in Rene88 DT." Superalloys 2004 173 - 178.

2003

  • W.H. Guo, W.A. Brantley, W.A.T. Clark, and M. J. Mills, 2003, "Transmission Electron Microscopic Investigation of a Pd-Ag-In-Sn Dental Alloy." Biomaterials 24, no. 10, 1705 - 1712.
  • R. Srinivasan, M.S. Daw, R.D. Noebe and M. J. Mills, 2003, "Observations of Glide Decomposition of a Dislocations at High Temperatures in Ni-Al Single Crystals Deformed along the Hard Orientation." Philosophical Magazine A 80, 1111 - 1132.
  • V. Hasija, S. Ghosh, M. J. Mills and D. S. Joseph, 2003, "Deformation and Creep Modeling in Polycrystalline Ti-6Al Alloys." Acta Mater 51, 4533 - 4549.
  • G.B. Viswanathan, M. J. Mills, V.K. Vasudevan, 2003, "Microstructural Effects on the Tensile Properties and Deformation Behavior of a Ti-48Al Gamma Titanium Aluminide." Metall. Mater. Trans 34A, no. 10, 2113 - 2127.

2002

  • S. Karthikeyan, G. B. Viswanathan, P. I. Gouma, Vijay K. Vasudevan, Y-W. Kim and M. J. Mills, 2002, "Mechanisms and Effect of Microstructure on Creep of TiAl-Based Alloys." Mat. Sci. Eng. A 329, 621 - 630.
  • G. B. Viswanathan, S. Karthikeyan and M. J. Mills, 2002, "Application of a Modified Jogged-Screw Model for Creep of TiAl and ï�¡-Ti Alloys." Metall. Mater. Trans. A 33A, 329 - 336.
  • M. C. Carroll, R. G. Buchheit, G. S. Daehn and M. J. Mills, 2002, "Optimum trace copper levels for SCC resistance in a Zn-modified Al-5083 alloy." Mater. Sci. Forum 396-4, 1443 - 1448.
  • L. Kovarik, P. I. Gouma, C. Kisielowski, S. A. Court and M. J. Mills, 2002, "High resolution transmission electron microscopy study of the early stages of aging in Al-Mg-Cu alloys." Mat. Sci. Forum 396-402, 1043 - 1048.
  • M. F. Savage, T. Neeraj and M. J. Mills, 2002, "Observation of Room Temperature Recovery During Creep of Titanium Alloys." Metall. Trans. A 33, 891 -
  • R. W. Hayes, G. B. Viswanathan and M. J. Mills, 2002, "Creep behavior of Ti-6Al-2Sn-4Zr-2Mo: I. The effect of nickel on creep deformation and microstructure." Acta Mater 50, 4953 - 4963.
  • G. B. Viswanathan S. Karthikeyan, R.W. Hayes and M. J. Mills, 2002, "Creep Behavior of Ti-6Al-2Sn-4Zr-2Mo: II. Mechanisms of Deformation." Acta Mater 50, 4953 - 4963.

2001

  • G. B. Viswanathan, R. W. Hayes and M. J. Mills, 2001, "A Study Based on Jogged-Screw Dislocations for High Temperature Creep in Ti Alloys." Mater. Sci. Eng. A 319-321, 706 - 710.
  • G. B. Viswanathan, S. Kartikeyan, M. J. Mills and V. K. Vasudevan, 2001, "Creep Properties of a Fully Lamellar Ti-48Al-2Cr-2Nb Alloy." Mater. Sci. Eng. A 319-321, 833 - 837.
  • R. Srinivasan, M. V.Nathal, M. S. Daw, G. F. Eggeler and M. J. Mills, 2001, "Mechanisms of Shearing of g’ Precipitates During High Temperature/ Low Stress Creep of Superalloy ingle Crystals." Strucural Intermetallics 2001 423 - 430.
  • T. Neeraj and M. J. Mills, 2001, "Short-Range Order (SRO) and Its Effect on the Primary Creep Behavior of a Ti-6wt% Al Alloy." Mater. Sci. Eng. A 319-321, 415 - 419.
  • P. I. Gouma and M. J. Mills, 2001, "Anatase to Rutile Transformation in Powders of Titania." J. Am. Ceram. Soc 84, 619 - 622.
  • T. Neeraj and M. J. Mills, 2001, "Weak-Fringing Faults in Ti-6wt%Al." Phil. Mag. A 82, 779 - 802.
  • S. Karthikeyan, G. B. Viswanathan, V. K. Vasudevan, Y-W. Kim and M. J. Mills, 2001, "Mechanisms and Effect of Microstructure on Creep of TiAl-Based Alloys." Strucural Intermetallics 2001 717 - 724.
  • S. Karthikeyan, G. B. Viswanathan, Y-W. Kim , V. K. Vasudevan and M. J. Mills, 2001, "Mechanisms and Effect of Microstructure on Creep of TiAl-Based Alloys." Creep and Fracture of Engineering Materials and Structures 55 - 64.
  • M.C. Carroll, M. J. Mills, G.S. Daehn, P.I. Gouma, M.F. Savage, and Brady R. Dunbar, 2001, "Effects Of Minor Cu Additions on a Zn-Modified Al-5083 Aluminum Alloy." Mater. Sci. Eng. A 319-321, 425 - 428.
  • M. F. Savage, J. Tatalovich, M. D. Uchic, M. Zupan, K. J. Hemker and M. J. Mills, 2001, "Deformation Mechanisms and Microtensile Behavior of Single Colony Ti-6242Si." Mater. Sci. Eng. A 319-321, 398 - 403.

2000

  • J. Brown; R. Srinivasan; M. J. Mills and M. S. Daw, 2000, "The mechanics of slip transition at intermediate temperatures in -oriented NiAl single crystals II: A metastable state for a {110} dislocations in NiAl and its role in their decomposition." Philosophical Magazine A 80, 2855 - 2870.
  • M. C. Carroll, P. I. Gouma, M. J. Mills, G. S. Daehn and B. R. Dunbar, 2000, "Effects of Zn Additions on the Grain Boundary Precipitation and Corrosion of Al-5083." Scripta Mater 42, 335 -
  • R. Srinivasan; J. Brown; M. S. Daw; R. D. Noebe; M. J Mills, 2000, "The mechanics of slip transition at intermediate temperatures in -oriented NiAl single crystals I. Experimental observations of the decomposition of a dislocations in Ni-44 at.% Al." Phil Mag A 80, 2841 - 2854.
  • R. Srinivasan, G.F. Eggeler and M. J. Mills, 2000, "ï�§Â´-cutting as rate-controlling recovery process during high-temperature and low-stress creep of superalloy single crystals." Acta Mater 48, 4867 - 4878.
  • T. Neeraj, D.-H. Hou, G. S. Daehn and M. J. Mills, 2000, "Phenomenological and Microstructural Analysis of Room Temperature Creep in titanium Alloys." Acta mater 48, 1225 - 1238.
  • P. I. Gouma, M. J. Mills and K. H. Sandhage, 2000, "The Fabrication of Free-Standing Titania-based Gas Sensors by the Oxidation of Metallic Titanium Foils." J. Am. Ceram. Soc 83, 1007 - 1009.

1999

  • T. W. Nelson, J. C. Lippold and M. J. Mills, 1999, "Nature and Evolution of the Fusion Boundary in Ferritic-Austenitic Dissimliar Weld Metals Part I: Nucleation and Growth." Welding Journal 78, 3295 - 3375.
  • P. I. Gouma, P. K. Dutta and M. J. Mills, 1999, "Structural Stability of Titania Thin Films." NanoStructured Materials 11, 1231 - 1237.
  • P. I. Gouma, S. Banerjee, and M. J. Mills, 1999, "TiO2-based Gas Sensors as Thick or Thin Films: An Evaluation of the Microstructure." Ceramic Transactions: Dielectric Ceramic Materials 100, 419 - 428.
  • G. B. Viswanathan, V. K. Vasudevan and M. J. Mills, 1999, "Modification of the Jogged Screw Model for Creep of g-TiAl." Acta Mater 47, 1399 - 1411.
  • D. A. Muller and M. J. Mills, 1999, "Electron Microscopy: Probing the Atomic Structure and Chemistry of Grain Boundaries, Interfaces and Defects." Mater. Sci. Eng. A 260, 12 - 28.
  • S. Suri, G. B. Viswanathan, T. Neeraj and M. J. Mills, 1999, "Room Temperature Deformation and Microstructural Characterization of Two Phase ï�¡ï€¯ï�¢ Titanium Alloys." Acta. Mater 47, 1019 - 1034.

1998

  • R. Srinivasan, M. F. Savage, M. S. Daw, R. D. Noebe and M. J. Mills, 1998, "Decomposition of a and a Dislocations in Hard-Oriented NiAl." Scripta Mater 39, 457 - 464.
  • P.I. Gouma, M. J. Mills, and Y-W. Kim, 1998, "Characterization of the Precipitation Process in a TiAl-based Alloy with Carbon and Silicon Additions." Phil. Mag. Lett 78, no. 1, 59 - 66.
  • M. F. Savage, R. Srinivasan, M. S. Daw, T. Lograsso and M. J. Mills, 1998, "Dislocation Processes and Deformation Behavior in (Fe,Ni) Al Single Crystals." Mater. Sci. Eng. A A258, 20 - 26.
  • T. W. Nelson, J. C. Lippold and M. J. Mills, 1998, "Investigation of Boundaries and Structures in Dissimilar Metal Welds." Science and Technology of Welding and Joining 3, 249 - 255.
  • P. I. Gouma, S. A. Akbar, and M. J. Mills, 1998, "Microstructural Characterization of Sensors based on Electronic Ceramic Materials." Journal of Metals 50, 1 -
  • M. J. Mills, R. Srinivasan and M. S. Daw, 1998, "Observation and Modelling of Dislocations in NiAl at Intermediate Temperatures." Phil. Mag. A 77, 823 -
  • P. I. Gouma, K. Subramanian, Y-W. Kim, and M. J. Mills, 1998, "Annealing Studies of ï�§-Titanium Aluminides Alloyed with Light Elements for Creep Strengthening." Intermetallics 6, 689 - 693.

1997

  • J. M. K. Wiezorek, M. J. Mills and H. L. Fraser, 1997, "Deformation and Fracture Characteristics in TiAl at Room Temperature and 800°C." Mater. Sci. Eng. A 234, 1106 - 1109.
  • S. Suri, D.-H. Hou, T. Neeraj, G. S. Daehn, J. M. Scott, R. W. Hayes and M. J. Mills, 1997, "Creep of Titanium Alloys at Lower Temperatures." Mater. Sci. and Eng. A A234-236, 996 -
  • J. M. K. Wiezorek, P. M. DeLuca, M. J. Mills and H. L. Fraser, 1997, "Deformation Mechanisms in a Binary Ti-48Al Alloy with Lamellar Microstructure." Phil. Mag. Lett 75, 271 -
  • D. L. Medlin, C. B. Carter, J. E. Angelo and M. J. Mills, 1997, "Climb and Glide of a/3 Dislocations in an Aluminum =3 Grain Boundary." Phil. Mag. A 75, 733 -

1995

  • M. J. Mills, J. E. Angelo, M. S. Daw, J. D. Weinberg and D. B. Miracle, 1995, "Fine Structure of a Dislocations and the Mechanical Properties of NiAl in the Hard Orientation." Mat. Sci. Eng. A A192/193, 134 - 141.
  • D. C. Chrzan, S. H. Goods and M. J. Mills, 1995, "Theory of Transient Creep in the L12 Intermetallic Compounds Displaying the Yield Strength Anomaly." Mat. Sci. Eng. A A192/193, 254 - 264.
  • J. E. Angelo and M. J. Mills, 1995, "Investigations of the Misfit Dislocation Structure at a CdTe(001)/GaAs(001) Interface Using Stillinger-Weber Potentials and High Resolution Transmission Electron Microscopy." Phil. Mag. A 72, 635 - 650.

1994

  • D. C. Chrzan and M. J. Mills, 1994, "Criticality in the Plastic Deformation of L12 Intermetallic Compounds." Phys. Rev. B 50, 30 -
  • D. L. Medlin, T. A. Friedmann, P. B. Mirkarimi, P. Rez, M. J. Mills, K. F. McCarty, 1994, "Microstructure of Cubic Boron-N-tride Thin-Films Grown by Ion-Assisted Pulsed-Laser Deposition." J. Appl. Phys 76, 295 - 303.
  • D. L. Medlin, T. A. Friedmann, P. B. Mirkarimi, M. J. Mills, K. F. McCarty, 1994, "Evidence for Rhombohedral Boron-Nitride in Cubic Boron-Nitride Films Grown by Ion-Assisted Deposition." Phys. Rev. B 50, 7884 - 7887.
  • T. A. Friedmann, K. F. McCarty, E. J. Klaus, J. C. Barbour, W. M. Clift, H. A. Johnsen, D. L. Medlin, M. J. Mills, D. K. Ottesen, 1994, "Pulsed-Laser Deposition of BN onto Silicon (100) Substrates at 600°C." Thin Solid Films 237, 48 - 56.
  • S. H. Stobbs, D. L. Medlin, M. J. Mills and W. M. Stobbs, 1994, "A Comparison of the Analysis of the Frensel Contrast in High-Resolution and Low-Resloution Images for the Characterization of the Rigid-Body Displacements at a Grain Boundary." Journal of Microscopy 176, 45 - 53.
  • T. A. Friedmann, P. Mirkarimi, D. L. Medlin, K. F. McCarty, E. J. Klaus, D. R. Boehme, H. A. Johnsen, M. J. Mills, D. K. Ottesen, J. C. Barbour, 1994, "Ion-Assisted Pulsed Laser Deposition of Cubic Boron Nitride Films." J. Appl. Phys 76, 3088 - 3101.
  • K. F. McCarty, M. J. Mills, D. L. Medlin, T. A. Friedmann, 1994, "Growth and Characterization of Epitaxial Cubic Boron Nitride Films on Silicon - Comment." Phys. Rev. B 50, 8907 - 8910.
  • M. J. Mills, M. S. Daw and S. M. Foiles, 1994, "High Resolution Transmission Electron Microscopy Studies of Dislocation Cores in Metals and Intermetallic Compounds." Ultramicroscopy 56, 79 - 93.

1993

  • M. H. Yoo, S. L. Sass, C. L. Fu, M. J. Mills, D. M. Dimiduk and E. P. George, 1993, "Deformation and Fracture of Intermetallics." Acta Metall. Mater 41, 987 -
  • M. J. Mills, 1993, "High Resolution Transmission Electron Microscopy and Atomistic Calculations of Grain Boundaries in Metals and Intermetallics." Mat. Sci. and Eng. A 166, 35 -
  • M. J. Mills and D. B. Miracle, 1993, "The Structure of and Dislocation Cores in NiAl." Acta metall. mater 41, 85 -
  • K. J. Hemker and M. J. Mills, 1993, "Measurement of APB and CSF Energies in Binary and Boron-Doped Ni3Al Using Weak Beam TEM." Phil. Mag A 68, 305 -
  • D. C. Chrzan and M. J. Mills, 1993, "Collective Behavior and Superdislocation Motion in Ni3Al." Mater. Sci. Eng. A 164, 82 -
  • K. J. Hemker, B. Viguier and M. J. Mills, 1993, "Dislocation Core Structures in the Ordered Intermetallic Alloy TiAl." Mater. Sci. Eng. A 164, 391 -

1992

  • K. J. Hemker, M. J. Mills and W. D. Nix, 1992, "A Critical Analysis of Existing Models for Plastic Flow in Ni3Al: Comparisons with Transient Deformation Experiments." J. Mater. Res. Soc 7, 2059 -
  • D. C. Chrzan and M. J. Mills, 1992, "Criticality in the Plastic Deformation of Ni3Al." Phys. Rev. Let 69, 2795 -
  • M. J. Mills and D. C. Chrzan, 1992, "Dynamical Simulation of Dislocation Motion in L12 Compounds." Acta Metall. Mater 40, 3051 -
  • T. A. Friedmann, K. F. McCarty, E. J. Klaus, H. A. Johnsen, M. J. Mills, D. K. Ottesen and R. H. Stulen, 1992, "Ion-Assisted Pulsed Laser Deposition of Cubic Boron Nitride on Si (100) Substrates." Appl. Phys. Lett 61, 2406 -
  • M. J. Mills and M. S. Daw, 1992, "High Resolution Transmission Electron Microscopy of Interfaces in Metals and Correlation with Atomistic Calculations." Ultramicroscopy 40, 247 -

1991

  • K. J. Hemker, M. J. Mills and W. D. Nix, 1991, "An Investigation of the Creep Properties of Ni3Al Single Crystals at Intermediate Temperatures." Acta Metall. Mater 39, 1901 -
  • M. J. Mills, S. H. Goods, S. M. Foiles and J. R. Whetstone, 1991, "The Influence of Boron Segregation on the Structure and Mechanical Properties of Boundaries in Bicrystals of Ni3Al." Scripta Metall 25, 1283 -
  • J. M. Pennison, U. Dahmen and M. J. Mills, 1991, "HREM Study of a ï�“3 (112) Twin Boundary in Aluminum." Phil. Mag. Lett 64, 277 -
  • N. Baluc, H. P. Karnthaler and M. J. Mills, 1991, "Weak Beam Observation of the Four-Fold Dissociation of Superlattice Dislocations and the Determination of the Fault Energies in Ni3(Al,Ta)." Phil. Mag. A 64, 137 -

1990

  • U. Dahmen, C. J. D. Hetherington, M. A. O'Keefe, K. H. Westmacott, M. J. Mills, M. S. Daw and V. Vitek, 1990, "Atomic Structure of a ï�“99 Grain Boundary in Aluminum: A Comparison between Atomic Resolution Observation and Pair-Potential and Embedded Atom Simulations." Phil. Mag. Lett 62, 327 -

1989

  • M. J. Mills and P. Stadelmann, 1989, "A Study of the Structure of Lomer and 60° Dislocations in Aluminum Using High Resolution Transmission Electron Microscopy." Phil. Mag. A 60, 355 -
  • M. J. Mills, 1989, "Determination of Compositional Ordering at Grain Boundaries in Boron-Doped Ni3Al." Scripta Metall 23, 2061 -

1988

  • M. J. Mills and P. Stadelmann, 1988, "The Structure of Asymmetrical Tilt Boundaries Formed During Creep of [112] Oriented Aluminum Single Crystals." J. de Physique 49, C5 - 257.

1986

  • M. J. Mills, J. C. Gibeling and W. D. Nix, 1986, "Measurement of Anelastic Creep Strains in Al-5.5 at% Mg Using A New Technique: Implications for the Mechanism of Class I Creep." Acta Metall 34, 915 -

1985

  • M. J. Mills, J. C. Gibeling and W. D. Nix, 1985, "A Dislocation Loop Model for Creep of Solid Solutions Based on the Steady State and Transient Creep Properties of Al-5.5 at% Mg." Acta Metall 33, 1503 -

Unknown

  • K.A. Unocic, M.J. Mills, G.S. Daehn, "Effect of Gallium Focused Ion Beam Milling on Preparation of Aluminum Thin Foils." J. Microscopy
  • M.C. Brandes, M.J. Mills, and J.C. Williams, "The Influence of Slip Character on the Creep and Fatigue Fracture of an ï�¡-Ti-Al Alloy." Metall. Mater. Trans. A

Presentations

  • "Simulation of High Resolution TEM Images of Defects." 1990, Presented at International Electron Microscopy Society Meeting, Seattle,
  • "The Study of Grain Boundaries Using High Resolution Transmission Electron Microscopy." 1991, Presented at ASU Winter TEM Symposium, Wickenburg,
  • "A Modified Jogged-Screw Model For Creep of Titanium Aluminides." 2004, Presented at International Symposium for Titanium Aluminides, Birmingham,
  • "Characterization and Modeling of Superalloy Performance." 2009, Presented at Cambridge University Workshop on Superalloys, Cambridge,
  • "Deformation Mechanisms in Titaium Aluminides." 2001, Presented at Pacific Rim International Conference on Materials (PRICM-4), Honolulu,
  • "Microstructure Analysis of Deformation Mechanisms in Ni-Base Superalloys." 2006, Presented at Australian Microscopy and Microanalysis Society,
  • "Microstructure and Creep Behavior of Nanocluster-Strengthened Ferritic Steels." 2010, Presented at MRS Spring Meeting, San Francisco,
  • "High Resolution Transmission Electron Microscopy of Grain Boundaries in Metals and Intermetallics." 1996, Presented at Joint International Meeting of the Japanese Institute of Metals and TMS on Advanced Materials and Technology for the 21st Century, Honolulu,
  • "The Yield Strength Anomaly." 1999, Presented at NATO Advanced Study Institute on Multiscale Phenomena in Plasticity, Ouranopolis, GR|GRC
  • "Deformation Mechanisms and Modeling of Cold Creep and Dwell Fatigue in Titanium Alloys." 2004, Presented at NUMIFORM-2004, Columbus,
  • "Creep Deformation in Superalloys: Characterization and Modeling." 2009, Presented at International Conference on High Temperature and High Strength Structural Materials, Hong Kong,
  • "Metastable Phase Formation in Aluminum Alloys." 2010, Presented at Adelboden Werkstoffseminar,
  • "Dislocation Processes and Deformation Behavior in B2 Intermetallic Compounds of the (Ni, Fe) Al Pseudobinary Sysytem." 1998, Presented at Symposium on Iron Aluminides: Alloy Design, Processing, Properties and Applications, TMS Spring Meeting, San Antonio,
  • "A Modified Jogged-Screw Model For Creep of Titanium Alloys and Titanium Aluminides." 2003, Presented at TMS Spring Meeting, San Diego,
  • "Deformation Mechanisms in the (Fe, Ni) Al Pseudobinary System." 2000, Presented at Fall Meeting of the Materials Research Society, Boston,
  • "Characterization of Deformation Mechanisms and Nanostructures in Engineering Alloys." 2003, Presented at Frontiers of Electron Microscopy and Microanalysis (FEMMS-2003), Berkeley,
  • "Mechanisms of Deformation in Superalloys." 2010, Presented at Symposium to Honor Vasek Vitek, TMS Annual Meeting, Seattle,
  • "Metastable Phases and Relationship to Mechanical Behavior in Al-Mg-Cu Alloys." 2010, Presented at PRICM 7 Conference, Cairns, AU|AUS
  • "The Study of Defects in Metals Using High Resolution Transmission Electron Microscopy and Atomistic Calculations." 1990, Presented at Materials Research Society Spring Meeting, San Francisco,
  • "Dynamical Simulation of Dislocation Motion in L12 Compounds." 1991, Presented at DOE-Sponsored Workshop on Computational Issues in the Mechanical Behavior of Metals and Intermetallics, Williamsburg,
  • "Dynamical Simulation of Dislocation Motion in L12 Compounds." 1991, Presented at DOE-Sponsored Workshop on Intermetallic Compounds, San Diego,
  • "High Resloution Transmission Electron Microscopy and Atomistic Calculations of Grain Boundaries in Metals and Intermetallics." 1992, Presented at DOE-Sponsored Workshop on Grain Boundaries and Interface Phenomena in the High Temperature Plasticity of Solids, Berkeley,
  • "Mechanisms of Deformation in Ni-Base Superalloys at Intermediate Temperatures." 2006, Presented at International Conference on Strength of Materials, X'ian, CN|CHN
  • "Observations and Modeling of Transformation-Induced Plasticity During Pseudo-Elastic Deformation in Ni-Ti Microcrystals." 2010, Presented at SMST Conference, Asilomar,
  • "Creep, Fatigue and Dwell Fatigue in Polycrystalline Superalloys." 2010, Presented at EuroSuperalloys, Wildbad Kreuth, DE|DEU
  • "The Structure and Properties of Grain Boundaries in Ni3Al." 1991, Presented at Materials Research Society Fall Meeting, Boston,
  • "Mechanisms of Creep in Superalloys at Intermediate Temperatures." 2008, Presented at International Conference on Creep of Engineering Materials, Bayreuth,
  • "Creep of Titanium Aluminides." 1998, Presented at Kyoto Workshop on Intermetallic Compounds, Kyoto,
  • "Electron Microscopy Based Studies of Engineering Alloys." 2002, Presented at Keynote lecture at DGM Materials Week, Munich, DE|DEU
  • "Structural Description of GPB/GPBII zones in Al-Cu-Mg Alloys." 2008, Presented at International Conference on Aluminium Alloys (ICAA11), Aachen, DE|DEU
  • "Microstructure- and Micromechanism-Sensitive Modeling of Creep and Fatigue in Ni-Base Superalloys." 2009, Presented at Gordon Research Conference of Physical Metallurgy, Andover,
  • "A Dislocation Model of the Anomalous Flow Behavior in L12 Compounds." 1991, Presented at Symposium on the Modelling of Deformation, Spring Meeting of the Metallurgical Society,
  • "HRTEM Studies of Dislocations and Interfaces in TiAl." 1996, Presented at Materials Research Society Fall Meeting, Boston,
  • "Strengthening Mechansims in Ordered Intermetallic Compounds." 1994, Presented at International Conference on the Strength of Metals and Alloys (ICSMA-10), Sendai, JP|JPN
  • "Dislocation Processes in the Deformation of Titanium Aluminides." 2000, Presented at International Symposium on Structural and Functional Intermetallics, Vancouver, CA|CAN
  • "Size Effects in Dislocation Processes in Microcrystal deformation." 2008, Presented at TMS Orlando 2008-Symposium in Honor of Prof. Hael Mughrabi,
  • "Importance of Reordering in the High Temeprature Deformation of Ni-Base Superalloys." 2008, Presented at Symposium in Honor of F. R. N. Nabarro, Materials Research Society Spring Meeting,
  • "Mechanisms of Creep in Lamellar TiAl." 1998, Presented at Workshop on Creep of Titanium Alluminides, Wright-Patterson AFB (Bass Lake),
  • "Mechanisms of Creep in Titanium Alloys." 1999, Presented at Symposium on Creep of Advanced Alloys for the 21st Century, TMS Annual Meeting,
  • "Cutting of Gamma-prime Particles During the High Temperature/Low Stress Creep of Ni-Based Superalloys." 2001, Presented at International Symposium on the Deformation and Microstructure of Intermetallics, Annual Meeting of TMS, New Orleans,
  • "Slip Transmission Mechanisms across Alpha/Beta Interfaces in Titanium Alloys." 2002, Presented at Gordon Research Conference on Physical Metallurgy,
  • "Low Temperature Creep Anomalies in Titanium Alloys." 2005, Presented at Spring Meeting of TMS, San Francisco,
  • "Dislocation Cores and Mechanical Properties in NiAl." 1995, Presented at TMS Annual Meeting, Las Vegas,
  • "Modeling of Creep in Ni-Base Superalloys." 2005, Presented at Symposium in Honor of Prof. Wolfgang Blum (Keynote),
  • "Mechanisms and Modeling of Creep in Advanced Structural Materials." 2005, Presented at AFOSR Workshop on Integration of Characterization, Modeling and Rapid Manufacturing, Bretinau, DE|DEU
  • "Microstructure Analysis of Deformation Mechanisms in Ni-Base Superalloys." 2006, Presented at Workshop on Alloys for High Temperature Applications, Bayreuth, DE|DEU
  • "Introduction to the Jogged Screw Model of Creep." 2006, Presented at Workshop on Alloys for High Temperature Applications, Bayreuth, DE|DEU
  • "High Resolution Electron Microscopy of Defects in Ni3Al." 1989, Presented at Annual meeting of the Electron Microscopy Society of America, San Antonio,
  • "The Structure of Dislocation Cores in Intermetallic Compounds." 1992, Presented at Frontiers of Electron Microscopy, Oakland,
  • "Deformation Core Structure and Deformation Mechanisms in Intermetallic Compounds." 2000, Presented at TMS Annual Meeting, Nashville,
  • "Application of A Modified Jogged-Screw Model For Creep Of Titanium Alloys and Titanium Aluminides." 2004, Presented at Multiscale-Modeling, Materials Resesearch Society Spring Meeting,
  • "HREM of Dislocation Cores in Intermetallic Compounds." 1995, Presented at Microscopy Society of America, Kansas City,
  • "Interfaces and Deformation in Titanium Alloys." 1997, Presented at The David A. Smith Memorial Symposium on Boundaries and Interfaces in Materials, TMS Fall Meeting, Indianapolis,
  • "High Resolution Transmission Electron Microscopy of Interfaces and Dislocations in Intermetallics." 1997, Presented at Joint Meeting of the German, Swiss and Austrian Microscopy Societies, Ravensburg, DE|DEU
  • "Effect of Solute Additions on Dislocation Structure and Deformation of B2 Intermetallic Compounds." 1998, Presented at Symposium on Solute Effects in Intermetallic Compounds, TMS Annual Meeting, Rosemont,
  • "Deformation Mechanisms During Creep of Titanium Alloys at Low temperatures." 2002, Presented at "Creep Deformation: Fundamentals and Applications," TMS Spring Meeting,
  • "Low Temperature Creep and Dwell Fatigue in Ti Alloys." 2003, Presented at 10th World Conference on Titanium Alloys,
  • "Connecting Dislocation Fine Structure and High Temperature Creep of Superalloys." 2004, Presented at TMS Spring Meeting, Charlotte,
  • "Quantitative High Resolution Transmission Electron Microscopy." 1992, Presented at National Center for Electron Microscopy Workshop on Quantitative Electron Micrscopy, Berkeley,
  • "Deformation Processes in Ni-Base Superalloys." 2007, Presented at Euromat, Nuremburg,
  • "HRTEM Studies of Dislocation Cores in Metals and Intermetallic Compounds." 1994, Presented at International Conference on High-Voltage, High-Resolution Transmission Electron Microscopy, Stuttgart, DE|DEU

Papers in Proceedings

2011

  • Q. Li, P. M. Anderson and M. J. Mills "Dislocation Confinement and Ultimate Strength in Nanoscale Polycrystals." in Mechanical Properties of Nanostructured Materials and Nanocomposites. Warrendale, (1 2011).
  • S. Karthikeyan, J. H. Moon, G. B. Viswanathan and M. J. Mills "Application of a Modified Jogged-Screw Model for Creep of Titanium Aluminides: Evaluation Of The Key Substructural Parameters." in Multiscale Modeling of Materials. Warrendale, (1 2011).
  • L. Kovarik, P. I. Gouma, S. A. Court, M. J. Mills "Microstructural Study of the Mechanism of Rapid Aging in Al-Mg-Cu Alloys." in Proceedings of the International Symposium on Automotive Alloys IV. (1 2011).

2008

  • L. Kovarik and M.J. Mills "HAADF Imaging and Ab Initio Analysis of GPBII zone in Al-Cu-Mg alloys." in Microscopy & Microanalysis. (1 2008).
  • M. C. Brandes, M.J. Mills and J. C. Williams "The Effect of Primary and Secondary Alpha Morphology on the Cold Creep Response of β-Processed Ti-6-2-4-2." in Titanium '07: Science and Technology, Proceedings of the World Conference on Titanium, 11th. Kyoto, (1 2008). 295 -
  • L. Kovarik, S.A. Court, H.L. Fraser, M.J. Mills "Structural Description of GPB/GPBII zones in Al-Cu-Mg Alloys." in Aluminium Alloys: Their Physical and Mechanical Properties. Aachen, (1 2008). 665 -

2007

  • R.R. Unocic, L. Kovarik, P.M. Sarosi, and M.J. Mills "Structural and Chemical Analysis of Stacking Faults in the g-phase of a Creep Deformed Ni-base Superalloy." in Proceedings of the Electron Microscopy Society of America. (1 2007).

2005

  • R. R. Dehoff, P. M. Sarosi, P. C. Collins, H. L. Fraser and M. J. Mills "Microstructure of LENS Deposited Nb-Si Alloys." in Integrated and Interdisciplinary Aspects of Intermetallics. (1 2005). 285 - 290.
  • L. Kovarik, M. K. Miller, S. A. Court and M. J. Mills "Atom Probe Tomography Study of GPB zones in Al-Mg-Cu-(Si) Alloys." in Proceedings of the Solid-Solid Phase Transformation in Inorganic Materials. (1 2005). 301 - 308.
  • R.R. Unocic, P.M. Sarosi, G.B. Viswanathan, and M.J. Mills "Creep Deformation Behavior of René 104." in Proceedings of the Electron Microscopy Society of America. (1 2005). 1874 - 1875.

2004

  • G. B. Viswanathan, P. M. Sarosi, M. Henry, D. Whitis and M.J. Mills "Deformation Mechanisms at Intermediate Creep Temperatures in Rene88 DT." in Superalloys 2004. (1 2004). 173 - 178.
  • P. M. Sarosi, G. B. Viswanathan, D. Whitis and M. J. Mills "Imaging and Characterization of g Precipitates in Nickel-Based superalloys." in Superalloys 2004. (1 2004). 989 - 996.
  • Polasik, A., Fraser, H.L. Mills, M.J., Larsen, J.M., Jha, S.K. "The role of microstructure on fatigue life variabiity in β-processed Ti-6Al-4V." in TMS MS&T 2004 Symposium on Materials Damage Prognosis. (1 2004).
  • M. C. Brandes and M.J. Mills "Recovery of Strain Hardening at Low Temperatures in Alpha Ti-6Al and Ti-6242." in Titanium '03: Science and Technology, Proceedings of the World Conference on Titanium, 10th. Hamburg, (1 2004).

2003

  • R. R. Dehoff, P. M. Sarosi, P. C. Collins, H. L. Fraser and M. J. Mills "Microstructural Evaluation of LENS Deposited Nb-Ti_Si-Cr Alloys." in Defect Properties and Related Phenomena in Intermetallic Alloys. (1 2003). 77 - 82.

2002

  • P. J. Wurm, P. Kumar, K. D. Ralston M. J. Mills and K. H. Sandhage "Fabrication of Lightweight Oxide/Intermetallic Composites at 1000°C By the Displacive Compensation of Porosity (DCP) Process." in Innovative Processing and Synthesis of Ceramics, Glasses and Composites V. Westerville, (1 2002).
  • M. J. Mills, T. Neeraj, M. F. Savagae, J. Tatalovich and G. S. Daehn "Deformation Mechanisms During Creep of Titanium Alloys at Low temperatures." in Creep Deformation: Fundamenetals and Applications. Warrendale, (1 2002). 389 - 398.
  • R. Srinivasan, M. V. Nathal, M. S. Daw, G. F. Eggeler and M. .J. Mills "Mechanisms of Shearing of ' Precipitates During High Temperature/Low Stress Creep of Superalloy Single Crystals." in Proceedings of the International Symposium on Structural Intermetallics-III. (1 2002).
  • L. Kovarik, P. I. Gouma, C. Kisielowski, S. A. Court, M. J. Mills "High Resolution Transmission Electron Microscopy Study of the Early Stages of Aging in Al-Mg-Cu Aloys." in Proceedings of the Eight International Conference on Aluminum Alloys (ICAA-8), Mater Sci Forum. (1 2002). 845 - 850.
  • M. C. Carroll, R. G. Buchheit, G.S. Daehn and M. J. Mills "Optimum Trace Copper Levels for SCC Resistance in a Zn-Modified Al-5083 Alloy." in Proceedings of the Eight International Conference on Aluminum Alloys (ICAA-8), Mater Sci Forum. (1 2002). 1443 - 1448.

2001

  • T. Neeraj, M. F. Savage, M. J. Mills and G. S. Daehn "Primary Creep in Polycrystalline Alpha Titanium Alloys: Coupled Observations and Stochastic Cellular Automaton Model." in Creep and Fracture of Engineering Materials and Structures. London, (1 2001). 49 -
  • M.C. Carroll, M. J. Mills, G.S. Daehn, P.I. Gouma, M.F. Savage, and Brady R. Dunbar "Effects Of Minor Sc, Zr Additions to Commercial Al-Mg-Mn Alloys." in Proceedings of the International Symposium on Automotive Alloys III. (1 2001).
  • G. B. Viswanathan, S. Kartikeyan, V. K. Vasudevan and M. J. Mills "Creep Mechanisms in Equiaxed and Lamellar Ti-48Al." in High Temperature ordered IntermetallicCompounds IX. Warrendale, (1 2001). N1.6.1 - 1.6.6.
  • S. Karthikeyan, G. B. Viswanathan, P. I. Gouma, Vijay K. Vasudevan, Y-W. Kim and M. J. Mills "Mechanisms and Effect of Microstructure on Creep of TiAl-Based Alloys." in Creep and Fracture of Engineering Materials and Structures. London, (1 2001). 55 - 64.
  • P. J. Wurm, P. Kumar, K. D. Ralston M. J. Mills and K. H. Sandhage "Fabrication of Dense, Lightweight, Oxide-Rich Oxide/Aluminide Composites at 1000°C By the Displacive Compensation of Porosity (DCP) Process." in Powder Materials: Current Research and Industrial Practices. Warrendale, (1 2001). 129 - 139.
  • P. R. Brenner, R. Srinivasan, R. D. Noebe, T. Lograsso and M. J. Mills "Processes and Deformation Behavior in -Oriented FeX-Ni60-X-Al40 Single Crystals." in High Temperature ordered IntermetallicCompounds IX. Warrendale, (1 2001). N6.1.1 - 6.1.10.

1999

  • G. S. Daehn, G. B. Viswanathan, M. J. Mills and V. K. Vasudevan "A Model of Creep Based on Interacting Elements and Its Application to the Primary Creep of Fully-Lamellar -TiAl." in Creep of Alloys for the 21st Century. (1 1999). 31 - 40.
  • M. J. Mills, G. B. Viswanathan and R. W. Hayes "Modification of the Jogged Screw Model for Creep of Titanium Alloys." in Creep of Alloys for the 21st Century. (1 1999). 197 - 206.

1998

  • J. M. K. Wiezorek, X. D. Zhang, M. J. Mills and H. L. Fraser "[unspecified]." in High Temperature Ordered Intermetallic Alloys VIII. (1 1998).
  • M. J. Mills, R. Srinivasan, M.F. Savage, R.D. Noebe, T. Lograsso and M.S. Daw "Dislocation Mechanisms in the (Ni,Fe)Al Pseudobinary Sysytem." in Interstitial and Substitutional Solute Effects in Intermetallics. (1 1998). 99 -
  • R. Srinivasan, M. F. Savage, R. D. Noebe and M. J. Mills "Mechanisms of the Slip Transition in Off-Stoichiometric NiAl Aloys." in High Temperature Ordered Intermetallic Alloys VIII. (1 1998).
  • P. I. Gouma and M. J. Mills "Electron Microscopy of TiO2-based Thick Films of Gas Sensors." in Institute of Physics Conference Series. Cambridge, (1 1998). 491 - 494.
  • S. Banerjee, P.I. Gouma, and M. J. Mills "Microstructural Characterization of Annealed Samples of Pure Yttria using Electron Microscopy." in Proc. Microscopy & Microanalysis Conference. (1 1998). 723 - 724.

1997

  • R. Srinivasan, M. F. Savage and M. J. Mills, M. S. Daw and R. D. Noebe "Dislocation Processes and Mechanical Properties in Hard-Oriented NiAl." in Deformation and Fracture of Ordered Intermetallic Materials. (1 1997). 325 -
  • M. J. Mills, J. M. K Wiezorek and H. L. Fraser "HRTEM Studies of Dislocations and Interfaces in TiAl." in Atomic Resolution Microscopy of Surfaces and Interfaces. (1 1997). 131 -
  • R. Srinivasan, M. F. Savage, M. S. Daw, R. D. Noebe, A. Garg and M. J. Mills "Deformation and Microstructure of Ni-Rich and Hf-Doped NiAl Single Crystals in the Hard Orientation." in International Symposium on Structural Intermetallics. Warrendale, (1 1997). 665 -
  • R. Srinivasan, M. F. Savage, M. S. Daw, R. D. Noebe and M. J. Mills "Effect of Deviation from Stoichiometry on Dislocation Structures and Deformation in NiAl." in High Temperature Ordered Intermetallic Alloys VII. (1 1997). 505 -
  • S. Suri, T. Neeraj, G. S. Daehn, D.-H. Hou, J. M. Scott, R. W. Hayes and M. J. Mills "Mechanisms of Primary Creep in Titanium Alloys at Lower Temperatures." in Creep and Fracture of Engineering Materials and Structures. Warrendale, (1 1997). 119 -
  • S. Suri, D.-H. Hou, T. Neeraj, J. M. Scott, and M. J. Mills "Effect of  Interfaces on the Creep Behavior of Single Colony Titanium Alloys at Room Temperature." in Interfacial Engineering for Optimized Properties. (1 1997). 267 -

1995

  • J. P. Simmons, M. J. Mills and S. I. Rao "Structure of 1/2 Dislocations in -TiAl by High Resolution TEM and Embedded Atom Method Modelling." in High Temperature Ordered Intermetallic Alloys IV. (1 1995). 137 - 144.
  • D. C. Chrzan, M. S. Daw, S. M. Foiles and M. J. Mills "Temperature Dependent Structure of a Superdislocations in Ni3Al." in High Temperature Ordered Intermetallic Alloys IV. (1 1995). 731 - 736.
  • M. J. Mills, M. S. Daw, J. E. Angelo and D. B. Miracle "A Dislocation Model for Flow at Intermediate Temperatures in Hard-Oriented NiAl." in High Temperature Ordered Intermetallic Alloys IV. (1 1995). 401 - 406.

1994

  • M. J. Mills, D. C. Chrzan and D. B. Miracle "Influence of Dislocation Fine Structure on the Strength and Flow Behavior of Ordered Intermetallic Compounds." in Proceedings of the 10th International Conference on the Strength of Materials, ICSMA-10. (1 1994). 41 -

1993

  • M. J. Mills, M. S. Daw, S. M. Foiles and D. B. Miracle "HRTEM and EAM Calculations of Dislocation Core Structures in NiAl." in Proc. Mater. Res. Soc. (1 1993). 257 -
  • K. J. Hemker, B. Viguier, R. Schaublin and M. J. Mills "Characterizing Defect Structures in Ordered Alloys Using Electron Microscopy and Computer Image Simulations." in Proc. Mater. Res. Soc. (1 1993). 329 -
  • D. L. Medlin, M. J. Mills, W. M. Stobbs, M. S. Daw and F. Cosandey "HRTEM Observations of a 3 (112) Bicrystal Boundary in Aluminum." in Proc. Mater. Res. Soc. (1 1993). 91 -

1992

  • M. J. Mills, S. H. Goods, S. M. Foiles "The Structure and Properties of Grain Boundaries in Ni3Al." in Proc. Mater. Res. Soc. (1 1992). 27 -

1991

  • M. J. Mills, S. H. Goods, S. M. Foiles "The Structure and Properties of Boundaries in Bicrystals of Boron-Doped Ni3Al." in Proc. Mater. Res. Soc. (1 1991). 423 -
  • K. J. Hemker, M. J. Mills, K. R. Forbes, D. D. Sternbergh and W. D. Nix "A Description of Octahedral Glide in Ni3Al Based on the Observations of Transient Deformation." in Proceedings of the 9th International Conference on the Strength of Metals and Alloys. (1 1991).

1990

  • C. J. D. Hetherington, U. Dahmen, M. A. O'Keefe, K. H. Westmacott, M. J. Mills, M. S. Daw and V. Vitek "An HREM Investigation into the Atomic Structure of an Aluminum Grain Boundary." in Proc. Mater. Res. Soc. (1 1990). 45 -
  • M. J. Mills, G. J. Thomas, M. S. Daw and F. Cosandey "The Structure of Near-Coincidence 9 Tilt Grain Boundary in Aluminum." in Proc. Mater. Res. Soc. (1 1990). 365 -
  • M. J. Mills and M. S. Daw "The Study of Defects in Metals Using HRTEM and Atomistic Calculations." in Proc. Mater. Res. Soc. (1 1990). 15 -

1989

  • M. J. Mills, N. Baluc and H.P. Karnthaler "A TEM Study of the Relationship Between Dislocation Structure and the Anomalous Temperature Dependence of the Flow Stress in Ordered Ni3Al." in Proc. Mater. Res. Soc. (1 1989). 203 -
  • M. J. Mills "High Resolution Electron Microscopy of Defects in Ni3Al." in Proc. Elec.Micr. Soc. Amer. (1 1989). 302 -

1987

  • M. J. Mills and W.D. Nix "A Study of the Substructure and the Mechanism of Anelastic Backflow during Class I Creep of Al-5.5 at% Mg." in Creep and Fracture of Engineering Materials and Structures. London, (1 1987). 127 -

1985

  • M. J. Mills, J. C. Gibeling and W. D. Nix "An Interpretation of Stress Change-Strain Transient Experiments in Al-5.5 at% Mg." in Strength of Metals and Alloys, Proc. ICSMA 7. Oxford, (1 1985). 767 -