You are here

Randall Mathison

  • Assistant Professor, Mechanical & Aerospace Engr
  • Room #158
    2300 W Case Rd
    Columbus, OH 43235
  • 614-636-0293

Honors

  • 20130601

    Dilip Ballal Early Career Engineer Award.

  • 20100601

    IGTI Heat Transfer Committee Best Paper Award.

  • 20060501

    IGTI Heat Transfer Committee Best Paper Award.

Journal Articles

2015

  • Nickol, J.B.; Mathison, R.M.; Malak, M.F.; Rana, R. et al., 2015, "Time-Resolved Heat Transfer and Surface Pressure Measurements for a Fully Cooled Transonic Turbine Stage." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 137, no. 9,
  • Habib,Alexander,J; Barton,Jeffery,L; Mathison,Randall,M; Dunn,Michael,G, 2015, "Wireless Telemetric Data Acquisition and Real-Time Control for a High Measurement-Density Internal Heat Transfer Experiment." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 137, no. 4, 041003 - 041003.

2014

2013

2012

  • Kahveci, H.S.; Haldeman, C.W.; Mathison, R.M.; Dunn, M.G., 2012, "Heat Transfer for the Film-Cooled Vane of a 1-1/2 Stage High-Pressure Transonic Turbine-Part II: Effect of Cooling Variation on the Vane Airfoil and Inner End Wall." Journal of Turbomachinery 135, no. 2,
  • Kahveci, H.S.; Haldeman, C.W.; Mathison, R.M.; Dunn, M.G., 2012, "Heat Transfer for the Film-Cooled Vane of a 1-1/2 Stage High-Pressure Transonic Turbine-Part I: Experimental Configuration and Data Review With Inlet Temperature Profile Effects." Journal of Turbomachinery 135, no. 2,
  • Mathison,R,M; Haldeman,C,W; Dunn,M,G, 2012, "Aerodynamics and Heat Transfer for a Cooled One and One-Half Stage High-Pressure Turbine-Part II: Influence of Inlet Temperature Profile on Blade Row and Shroud." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 134, no. 1, 011007 - 011007.
  • Mathison,R,M; Haldeman,C,W; Dunn,M,G, 2012, "Aerodynamics and Heat Transfer for a Cooled One and One-Half Stage High-Pressure Turbine-Part III: Impact of Hot-Streak Characteristics on Blade Row Heat Flux." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 134, no. 1, 011008 - 011008.
  • Mathison,R,M; Haldeman,C,W; Dunn,M,G, 2012, "Heat Transfer for the Blade of a Cooled Stage and One-Half High-Pressure Turbine-Part I: Influence of Cooling Variation." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 134, no. 3, 031014 - 031014.
  • Mathison,R,M; Haldeman,C,W; Dunn,M,G, 2012, "Aerodynamics and Heat Transfer for a Cooled One and One-Half Stage High-Pressure Turbine-Part I: Vane Inlet Temperature Profile Generation and Migration." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 134, no. 1, 011006 - 011006.
  • Haldeman,C.W.; Dunn,M.G.; Mathison,R.M., 2012, "Fully Cooled Single Stage HP Transonic Turbine-Part I: Influence of Cooling Mass Flow Variations and Inlet Temperature Profiles on Blade Internal and External Aerodynamics." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 134, no. 3, 031010 - 031010.
  • Mathison,Randall,M; Wishart,Mark,B; Haldeman,Charles,W; Dunn,Michael,G, 2012, "Temperature Predictions and Comparison With Measurements for the Blade Leading Edge and Platform of a 1 1/2 Stage Transonic HP Turbine." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 134, no. 1, 011016 - 011016.
  • Mathison,R,M; Haldeman,C,W; Dunn,M,G, 2012, "Heat Transfer for the Blade of a Cooled Stage and One-Half High-Pressure Turbine-Part II: Independent Influences of Vane Trailing Edge and Purge Cooling." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 134, no. 3, 031015 - 031015.
  • Haldeman, C.W.; Dunn, M.G.; Mathison,R.M., 2012, "Fully Cooled Single Stage HP Transonic Turbine-Part II: Influence of Cooling Mass Flow Changes and Inlet Temperature Profiles on Blade and Shroud Heat-Transfer." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 134, no. 3, 031011 - 031011.

2008

  • Haldeman,C,W; Mathison,R,M; Dunn,M,G; Southworth,S,A; Harral,J,W; Heitland,G, 2008, "Aerodynamic and heat flux measurements in a single-stage fully cooled turbine - Part I: Experimental approach." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 130, no. 2, 021015 - 021015.
  • Haldeman,C,W; Mathison,R,M; Dunn,M,G; Southworth,S,A; Harral,J,W; Heltland,G, 2008, "Aerodynamic and heat flux measurements in a single-stage fully cooled turbine - Part II: Experimental results." JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME 130, no. 2, 021016 - 021016.

2005

  • Mathison, R.M.; Dunn, M.G.; Weaver, M.M.; Dushko, A., 2005, "Measurement of air film damping effectiveness." Journal of Turbomachinery 127, no. 3, 557-563 - 557-563.

Unknown

  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; Liu, J.S. et al., "Unsteady Heat Transfer and Pressure Measurements on the Airfoil of a Rotating Transonic Turbine with Multiple Cooling Configurations." Journal of Engineering for Gas Turbines and Power
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; Liu, J.S. et al., "An Investigation of Coolant Within Serpentine Passages of a High-Pressure Axial Gas Turbine Blade." Journal of TURBOMACHINERY-TRANSACTIONS OF THE ASME

Presentations

  • "Heat Transfer Measurements for a Cooled High-Pressure Turbine with Multiple Hole Shapes and Purge Flow Variation." 2016, Presented at Turbine Engine Technology Symposium,
  • "Experimental Investigation of Inlet Temperature Profile and Cooling Effects for a 1-1/2 Stage Turbine." 2010, Presented at Turbine Engine Technology Symposium,
  • "Determination of Transient Heat Transfer Rates for a Film Cooled Metal Plate in a Blowdown Facility using Infrared Thermography." 2016, Presented at AIAA Propulsion and Energy,
  • "Recent Experiments/CFD Related to Purge Cavity Flows and Aeroperformance for Two Different Cooled Full Stage High-Pressure Turbines." 2012, Presented at Turbine Engine Technology Symposium,
  • "Time-Resolved Measurements for a Fully-Cooled Transonic Turbine Stage and Development of a Telemetric Acquisition and Control System." 2014, Presented at Turbine Engine Technology Symposium,

Papers in Proceedings

2018

  • Nickol, J.; Tomko, M.; Mathison, R.; Liu, J. et al. "Heat Transfer and Pressure Measurements for the Forward Purge Cavity, Inner Endwall, and Rotor Platform of a Cooled Transonic Turbine Stage." in ASME Turbo Expo. (6 2018).
  • Nickol, J.; Tomko, M.; Mathison, R.; Liu, J.S. et al. "Heat transfer and pressure measurements for the forward purge cavity, inner endwall, and rotor platform of a cooled transonic turbine stage." (1 2018).

2017

  • Liu, J-S.; Morris, M.C.; Malak, M.F.; Mathison, R.M. et al. "COMPARISON OF 3D UNSTEADY TRANSIENT CONJUGATE HEAT TRANSFER ANALYSIS ON A HIGH PRESSURE COOLED TURBINE STAGE WITH EXPERIMENTAL DATA." (1 2017).
  • Liu, J.S.; Morris, M.C.; Malak, M.F.; Mathison, R.M. et al. "Comparison of 3D unsteady transient conjugate heat transfer analysis on a high pressure cooled turbine stage with experimental data." (1 2017).
  • Liu, J-S.; Morris, M.C.; Malak, M.F.; Mathison, R.M. et al. "COMPARISON OF 3D UNSTEADY TRANSIENT CONJUGATE HEAT TRANSFER ANALYSIS ON A HIGH PRESSURE COOLED TURBINE STAGE WITH EXPERIMENTAL DATA." in ASME Turbo Expo: Turbine Technical Conference and Exposition. (1 2017).

2016

  • Nickol, J.B., Mathison, R.M., Dunn, M.G., Liu, J.S., Malak, M.F. "Unsteady Heat Transfer and Pressure Measurements on the Airfoils of a Rotating Transonic Turbine With Multiple Cooling Configurations." in ASME Turbo Expo. (6 2016).
  • Chen, L.; Mathison, R.M. "Determination of transient heat transfer rates for a film cooled metal plate in a blowdown facility using infrared thermography." (1 2016).
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; Liu, J.S. et al. "UNSTEADY HEAT TRANSFER AND PRESSURE MEASUREMENTS ON THE AIRFOILS OF A ROTATING TRANSONIC TURBINE WITH MULTIPLE COOLING CONFIGURATIONS." in ASME Turbo Expo: Turbine Technical Conference and Exposition. (1 2016).
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; Liu, J.S. et al. "AN INVESTIGATION OF COOLANT WITHIN SERPENTINE PASSAGES OF A HIGH-PRESSURE AXIAL GAS TURBINE BLADE." (1 2016).
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; Liu, J.S. et al. "UNSTEADY HEAT TRANSFER AND PRESSURE MEASUREMENTS ON THE AIRFOILS OF A ROTATING TRANSONIC TURBINE WITH MULTIPLE COOLING CONFIGURATIONS." (1 2016).
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; Liu, J.S. et al. "AN INVESTIGATION OF COOLANT WITHIN SERPENTINE PASSAGES OF A HIGH-PRESSURE AXIAL GAS TURBINE BLADE." in ASME Turbo Expo: Turbine Technical Conference and Exposition. (1 2016).
  • Chen, L, Mathison, RM "Determination of Transient Heat Transfer Rates for a Film Cooled Metal Plate in a Blowdown Facility using Infrared Thermography." in AIAA Propulsion and Energy Forum. (7 2016).
  • Nickol, J.B., Mathison, R.M., Dunn, M.G., Liu, J.S., Malak, M.F. "An Investigation of Coolant Within Serpentine Passages of a High-Pressure Axial Gas Turbine Blade." in ASME Turbo Expo. (6 2016).
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; Liu, J.S. et al. "Unsteady heat transfer and pressure measurements on the airfoils of a rotating transonic turbine with multiple cooling configurations." (1 2016).
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; Liu, J.S. et al. "An investigation of coolant within serpentine passages of a high-pressure axial gas turbine blade." (1 2016).

2014

  • Nickol, J.B.; Mathison, R.M.; Malak, M.F.; Rana, R. et al. "Time-resolved heat transfer and surface pressure measurements for a fully-cooled transonic turbine stage." (1 2014).
  • Nickol, J.B., Mathison, R.M., Malak, M.F. Rana, R., and Liu, J.S. "Time-Resolved Heat Transfer and Surface Pressure Measurements for a Fully-Cooled Transonic Turbine Stage." in ASME Turbo Expo. (6 2014).
  • Habib, A.J.; Barton, J.L.; Mathison, R.M.; Dunn, M.G. "WIRELESS TELEMETRIC DATA ACQUISITION AND REAL-TIME CONTROL FOR A HIGH MEASUREMENT-DENSITY INTERNAL HEAT TRANSFER EXPERIMENT." in ASME Turbo Expo: Turbine Technical Conference and Exposition. (1 2014).
  • Habib, A.J.; Barton, J.L.; Mathison, R.M.; Dunn, M.G. "Wireless telemetric data acquisition and real-time control for a high measurement-density internal heat transfer experiment." (1 2014).
  • Habib, A.J.; Barton, J.L.; Mathison, R.M.; Dunn, M.G. et al. "WIRELESS TELEMETRIC DATA ACQUISITION AND REAL-TIME CONTROL FOR A HIGH MEASUREMENT-DENSITY INTERNAL HEAT TRANSFER EXPERIMENT." (1 2014).
  • Nickol, J.B.; Mathison, R.M.; Malak, M.F.; Rana, R. et al. "TIME-RESOLVED HEAT TRANSFER AND SURFACE PRESSURE MEASUREMENTS FOR A FULLY-COOLED TRANSONIC TURBINE STAGE." in ASME Turbo Expo: Turbine Technical Conference and Exposition. (1 2014).
  • Nickol, J.B.; Mathison, R.M.; Malak, M.F.; Rana, R. et al. "TIME-RESOLVED HEAT TRANSFER AND SURFACE PRESSURE MEASUREMENTS FOR A FULLY-COOLED TRANSONIC TURBINE STAGE." (1 2014).
  • Habib, A.J., Barton, J.L., Mathison, R.M., and Dunn, M.G. "Wireless Telemetric Data Acquisition and Real-Time Control for a High Measurement-Density Internal Heat Transfer Experiment." in ASME Turbo Expo. (6 2014).

2013

  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G. "HEAT-FLUX MEASUREMENTS FOR A REALISTIC COOLING HOLE PATTERN WITH MULTIPLE FLOW CONDITIONS." in ASME Turbo Expo: Turbine Technical Conference and Exposition. (1 2013).
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G.; ASME, "HEAT-FLUX MEASUREMENTS FOR A REALISTIC COOLING HOLE PATTERN WITH MULTIPLE FLOW CONDITIONS." (1 2013).
  • Dunn, M.; Mathison, R. "HISTORY OF SHORT-DURATION MEASUREMENT PROGRAMS RELATED TO GAS TURBINE HEAT TRANSFER, AERODYNAMICS, AND AEROPERFORMANCE AT CALSPAN AND OSU." in ASME Turbo Expo: Turbine Technical Conference and Exposition. (1 2013).
  • Dunn, M.G. and Mathison, R.M. "History of Short-Duration Measurement Programs Related to Gas Turbine Heat Transfer, Aerodynamics, and Aeroperformance at Calspan and OSU." in ASME Turbo Expo. (6 2013).
  • Smith, M.A.; Mathison, R.M.; Dunn, M.G. "HEAT TRANSFER FOR HIGH ASPECT RATIO RECTANGULAR CHANNELS IN A STATIONARY SERPENTINE PASSAGE WITH TURBULATED AND SMOOTH SURFACES." in ASME Turbo Expo: Turbine Technical Conference and Exposition. (1 2013).
  • Dunn, M.; Mathison, R.; ASME, "HISTORY OF SHORT-DURATION MEASUREMENT PROGRAMS RELATED TO GAS TURBINE HEAT TRANSFER, AERODYNAMICS, AND AEROPERFORMANCE AT CALSPAN AND OSU." (1 2013).
  • Smith, M.A.; Mathison, R.M.; Dunn, M.G. "Heat transfer for high aspect ratio rectangular channels in a stationary serpentine passage with turbulated and smooth surfaces." (12 2013).
  • Nickol, J.B., Mathison, R.M., and Dunn, M.G. "Heat-Flux Measurements for a Realistic Cooling Hole Pattern with Multiple Flow Conditions." in ASME Turbo Expo. (6 2013).
  • Dunn, M.; Mathison, R. "History of short-duration measurement programs related to gas turbine heat transfer, aerodynamics, and aeroperformance at Calspan and OSU." (12 2013).
  • Nickol, J.B.; Mathison, R.M.; Dunn, M.G. "Heat-flux measurements for a realistic cooling hole pattern with multiple flow conditions." (12 2013).
  • Smith, M.A.; Mathison, R.M.; Dunn, M.G.; ASME, "HEAT TRANSFER FOR HIGH ASPECT RATIO RECTANGULAR CHANNELS IN A STATIONARY SERPENTINE PASSAGE WITH TURBULATED AND SMOOTH SURFACES." (1 2013).
  • Smith, M.A., Mathison, R.M., and Dunn, M.G. "Heat Transfer for High Aspect Ratio Rectangular Channels in a Stationary Serpentine Passage with Turbulated and Smooth Surfaces." in ASME Turbo Expo. (6 2013).

2012

  • Green, B.R.; Mathison, R.M.; Dunn, M.G. "Time-averaged and time-accurate aerodynamic effects of forward rotor cavity purge flow for a high-pressure turbine-Part I: Analytical and experimental comparisons." (12 2012).
  • Green, B.R.; Mathison, R.M.; Dunn, M.G. "Time-averaged and time-accurate aerodynamic effects of rotor purge flow for a modern, one and one-half stage high-pressure turbine -Part II: Analytical flow field analysis." (12 2012).
  • Kahveci, H.S.; Haldeman, C.W.; Mathison, R.M.; Dunn, M.G. et al. "HEAT TRANSFER FOR THE FILM-COOLED VANE OF A 1-1/2 STAGE HIGH-PRESSURE TRANSONIC TURBINE - PART II: EFFECT OF COOLING VARIATION ON THE VANE AIRFOIL AND INNER ENDWALL." (1 2012).
  • Kahveci, H.S.; Haldeman, C.W.; Mathison, R.M.; Dunn, M.G. "HEAT TRANSFER FOR THE FILM-COOLED VANE OF A 1-1/2 STAGE HIGH-PRESSURE TRANSONIC TURBINE-PART I: EXPERIMENTAL CONFIGURATION AND DATA REVIEW WITH INLET TEMPERATURE PROFILE EFFECTS." in ASME Turbo Expo 2011. (1 2012).
  • Kahveci, H.S.; Haldeman, C.W.; Mathison, R.M.; Dunn, M.G. et al. "HEAT TRANSFER FOR THE FILM-COOLED VANE OF A 1-1/2 STAGE HIGH-PRESSURE TRANSONIC TURBINE-PART I: EXPERIMENTAL CONFIGURATION AND DATA REVIEW WITH INLET TEMPERATURE PROFILE EFFECTS." (1 2012).
  • Kahveci, H.S.; Haldeman, C.W.; Mathison, R.M.; Dunn, M.G. "HEAT TRANSFER FOR THE FILM-COOLED VANE OF A 1-1/2 STAGE HIGH-PRESSURE TRANSONIC TURBINE - PART II: EFFECT OF COOLING VARIATION ON THE VANE AIRFOIL AND INNER ENDWALL." in ASME Turbo Expo 2011. (1 2012).
  • Green, B.R.; Mathison, R.M.; Dunn, M.G. "COMPARISON OF HARMONIC AND TIME-MARCHING UNSTEADY CFD SOLUTIONS WITH MEASUREMENTS FOR A SINGLE STAGE HIGH-PRESSURE TURBINE." in ASME Turbo Expo 2012. (1 2012).
  • Green, B.R., Mathison, R.M., and Dunn, M.G. "Comparison of Harmonic and Time-Marching Unsteady CFD Solutions with Measurements for a Single Stage High-Pressure Turbine." in ASME Turbo Expo. (6 2012).
  • Green, B.R., Mathison, R.M., and Dunn, M.G. "Time-Averaged and Time-Accurate Aerodynamic Effects of Rotor Purge Flow for a Modern, One and One-Half Stage High-Pressure Turbine-—Part II: Analytical Flow Field Analysis." in ASME Turbo Expo. (6 2012).
  • Green, B.R.; Mathison, R.M.; Dunn, M.G.; ASME, "COMPARISON OF HARMONIC AND TIME-MARCHING UNSTEADY CFD SOLUTIONS WITH MEASUREMENTS FOR A SINGLE STAGE HIGH-PRESSURE TURBINE." (1 2012).
  • Green, B.R.; Mathison, R.M.; Dunn, M.G.; ASME, "TIME-AVERAGED AND TIME-ACCURATE AERODYNAMIC EFFECTS OF FORWARD ROTOR CAVITY PURGE FLOW FOR A HIGH-PRESSURE TURBINE-PART I: ANALYTICAL AND EXPERIMENTAL COMPARISONS." (1 2012).
  • Green, B.R., Mathison, R.M., and Dunn, M.G. "Time-Averaged and Time-Accurate Aerodynamic Effects of Forward Rotor Cavity Purge Flow for a High-Pressure Turbine—Part I: Analytical and Experimental Comparisons." in ASME Turbo Expo. (6 2012).
  • Haldeman, C.; Dunn, M.; Mathison, R.; Troha, W. et al. "Aeroperformance measurements for a fully cooled high-pressure turbine stage." (12 2012).
  • Haldeman, C.; Dunn, M.; Mathison, R.; Troha, W. et al. "AEROPERFORMANCE MEASUREMENTS FOR A FULLY COOLED HIGH-PRESSURE TURBINE STAGE." in ASME Turbo Expo 2012. (1 2012).
  • Haldeman, C.W., Dunn, M.G., Mathison, R.M., Troha, W., Vander Hoek, T., and Riahi, A. "Aeroperformance Measurements for a Fully Cooled High-Pressure Turbine Stage." in ASME Turbo Expo. (6 2012).
  • Haldeman, C.; Dunn, M.; Mathison, R.; Troha, W. et al. "AEROPERFORMANCE MEASUREMENTS FOR A FULLY COOLED HIGH-PRESSURE TURBINE STAGE." (1 2012).
  • Green, B.R.; Mathison, R.M.; Dunn, M.G. "TIME-AVERAGED AND TIME-ACCURATE AERODYNAMIC EFFECTS OF ROTOR PURGE FLOW FOR A MODERN, ONE AND ONE-HALF STAGE HIGH-PRESSURE TURBINE -PART II: ANALYTICAL FLOW FIELD ANALYSIS." in ASME Turbo Expo 2012. (1 2012).
  • Green, B.R.; Mathison, R.M.; Dunn, M.G.; ASME, "TIME-AVERAGED AND TIME-ACCURATE AERODYNAMIC EFFECTS OF ROTOR PURGE FLOW FOR A MODERN, ONE AND ONE-HALF STAGE HIGH-PRESSURE TURBINE -PART II: ANALYTICAL FLOW FIELD ANALYSIS." (1 2012).
  • Green, B.R.; Mathison, R.M.; Dunn, M.G. "TIME-AVERAGED AND TIME-ACCURATE AERODYNAMIC EFFECTS OF FORWARD ROTOR CAVITY PURGE FLOW FOR A HIGH-PRESSURE TURBINE-PART I: ANALYTICAL AND EXPERIMENTAL COMPARISONS." in ASME Turbo Expo 2012. (1 2012).
  • Green, B.R.; Mathison, R.M.; Dunn, M.G. "Comparison of harmonic and time-marching unsteady cfd solutions with measurements for a single stage high-pressure turbine." (12 2012).

2011

  • Kahveci, H.S., Haldeman, C.W., Mathison, R.M., and Dunn, M.G. "Heat Transfer for the Film-Cooled Vane of a 1-1/2 Stage High-Pressure Transonic Turbine- Part II: Effect of Cooling Variation on Vane Airfoil and Inner Endwall." in ASME Turbo Expo. (6 2011).
  • Kahveci, H.S., Haldeman, C.W., Mathison, R.M., and Dunn, M.G. "Heat Transfer for the Film-Cooled Vane of a 1-1/2 Stage High-Pressure Transonic Turbine- Part I: Experimental Configuration and Data Review with Inlet Temperature Profile Effects." in ASME Turbo Expo. (6 2011).
  • Kahveci, H.S.; Haldeman, C.W.; Mathison, R.M.; Dunn, M.G. "Heat transfer for the film-cooled vane of a 1-1/2 stage highpressure transonic turbine-part I: Experimental configuration and data review with inlet temperature profile effects." (12 2011).
  • Kahveci, H.S.; Haldeman, C.W.; Mathison, R.M.; Dunn, M.G. "Heat transfer for the film-cooled vane of a 1-1/2 stage highpressure transonic turbine - Part II: Effect of cooling variation on the vane airfoil and inner endwall." (12 2011).

2010

  • Haldeman, C.W.; Dunn, M.G.; Mathison, R.M. "Fully-cooled single stage HP transonic turbine: Part II - Influence of cooling mass flow changes and inlet temperature profiles on blade and shroud heat-transfer." (12 2010).
  • Mathison, R.M.; Wishart, M.B.; Haldeman, C.W.; Dunn, M.G. "Temperature predictions and comparison with measurements for the blade leading edge and platform of a 1-1/2 stage transonic HP turbine." (12 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "Heat transfer for the blade of a cooled stage and one-half high-pressure turbine, Part II: Independent influences of vane trailing edge and purge cooling." (12 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "Aerodynamics and heat transfer for a cooled one and one-half stage high-pressure turbine-part III: Impact of hot streak characteristics on blade row heat flux." (12 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "Aerodynamics and heat transfer for a cooled one and one-half stage high-pressure turbine-Part II: Influence of inlet temperature profile on blade row and shroud." (12 2010).
  • Haldeman, C.W.; Dunn, M.G.; Mathison, R.M. "Fully-cooled single stage HP transonic turbine: Part i - Influence of cooling mass flow variations and inlet temperature profiles on blade internal and external aerodynamics." (12 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "Heat transfer for the blade of a cooled stage and one-half high-pressure turbine, Part I: Influence of cooling variation." (12 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "Aerodynamics and heat transfer for a cooled one and one-half stage high-pressure turbine-part I: Vane inlet temperature profile generation and migration." (12 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G.; ASME, "HEAT TRANSFER FOR THE BLADE OF A COOLED STAGE AND ONE-HALF HIGH-PRESSURE TURBINE, PART II: INDEPENDENT INFLUENCES OF VANE TRAILING EDGE AND PURGE COOLING." (1 2010).
  • Haldeman, C.W.; Dunn, M.G.; Mathison, R.M.; ASME, "Fully-Cooled Single Stage HP Transonic Turbine: Part II - Influence of Cooling Mass Flow Changes and Inlet Temperature Profiles on Blade and Shroud Heat-transfer." (1 2010).
  • Haldeman, C.W.; Dunn, M.G.; Mathison, R.M.; ASME, "Fully-Cooled Single Stage HP Transonic Turbine: Part I - Influence of Cooling Mass Flow Variations and Inlet Temperature Profiles on Blade Internal and External Aerodynamics." (1 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G.; ASME, "AERODYNAMICS AND HEAT TRANSFER FOR A COOLED ONE AND ONE-HALF STAGE HIGH-PRESSURE TURBINE-PART III: IMPACT OF HOT STREAK CHARACTERISTICS ON BLADE ROW HEAT FLUX." (1 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G.; ASME, "AERODYNAMICS AND HEAT TRANSFER FOR A COOLED ONE AND ONE-HALF STAGE HIGH-PRESSURE TURBINE-PART II: INFLUENCE OF INLET TEMPERATURE PROFILE ON BLADE ROW AND SHROUD." (1 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "HEAT TRANSFER FOR THE BLADE OF A COOLED STAGE AND ONE-HALF HIGH-PRESSURE TURBINE, PART II: INDEPENDENT INFLUENCES OF VANE TRAILING EDGE AND PURGE COOLING." in ASME Turbo Expo 2010. (1 2010).
  • Haldeman, C.W., Dunn, M.G., and Mathison, R.M., 2010 "Fully-Cooled Single Stage HP Transonic Turbine: Part I—Influence of Cooling Mass Flow Variations and Inlet Temperature Profiles on Blade Internal and External Aerodynamics." (6 2010).
  • Mathison, R.M., Haldeman, C.W., and Dunn, M.G. "Aerodynamics and Heat Transfer for a Cooled One and One-Half Stage High-Pressure Turbine: Part II—Influence of Inlet Temperature Profile on Blade Row and Shroud." in ASME Turbo Expo. (6 2010).
  • Mathison, R.M., Haldeman, C.W., and Dunn, M.G. "Aerodynamics and Heat Transfer for a Cooled One and One-Half Stage High-Pressure Turbine--Part I: Vane Inlet Temperature Profile Generation and Migration." in ASME Turbo Expo. (6 2010).
  • Mathison, R.M., Haldeman, C.W., and Dunn, M.G. "Heat Transfer for the Blade of a Cooled Stage and One-Half High-Pressure Turbine: Part II—Independent Influences of Vane Trailing Edge and Purge Cooling." (6 2010).
  • Mathison, R.M., Haldeman, C.W., and Dunn, M.G. "Heat Transfer for the Blade of a Cooled Stage and One-Half High-Pressure Turbine: Part I—Influence of Cooling Variation." in ASME Turbo Expo. (6 2010).
  • Haldeman, C.W., Dunn, M.G., and Mathison, R.M. "Fully-Cooled Single Stage HP Transonic Turbine: Part II—Influence of Cooling Mass Flow Changes and Inlet Temperature Profiles on Blade and Shroud Heat-Transfer." in ASME Turbo Expo. (6 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G.; ASME, "AERODYNAMICS AND HEAT TRANSFER FOR A COOLED ONE AND ONE-HALF STAGE HIGH-PRESSURE TURBINE-PART I: VANE INLET TEMPERATURE PROFILE GENERATION AND MIGRATION." (1 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "AERODYNAMICS AND HEAT TRANSFER FOR A COOLED ONE AND ONE-HALF STAGE HIGH-PRESSURE TURBINE-PART II: INFLUENCE OF INLET TEMPERATURE PROFILE ON BLADE ROW AND SHROUD." in ASME Turbo Expo 2010. (1 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "AERODYNAMICS AND HEAT TRANSFER FOR A COOLED ONE AND ONE-HALF STAGE HIGH-PRESSURE TURBINE-PART I: VANE INLET TEMPERATURE PROFILE GENERATION AND MIGRATION." in ASME Turbo Expo 2010. (1 2010).
  • Mathison, R.M.; Wishart, M.B.; Haldeman, C.W.; Dunn, M.G. "TEMPERATURE PREDICTIONS AND COMPARISON WITH MEASUREMENTS FOR THE BLADE LEADING EDGE AND PLATFORM OF A 1-1/2 STAGE TRANSONIC HP TURBINE." in ASME Turbo Expo 2010. (1 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "HEAT TRANSFER FOR THE BLADE OF A COOLED STAGE AND ONE-HALF HIGH-PRESSURE TURBINE, PART I: INFLUENCE OF COOLING VARIATION." in ASME Turbo Expo 2010. (1 2010).
  • Mathison, R.M.; Wishart, M.B.; Haldeman, C.W.; Dunn, M.G. et al. "TEMPERATURE PREDICTIONS AND COMPARISON WITH MEASUREMENTS FOR THE BLADE LEADING EDGE AND PLATFORM OF A 1-1/2 STAGE TRANSONIC HP TURBINE." (1 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G. "AERODYNAMICS AND HEAT TRANSFER FOR A COOLED ONE AND ONE-HALF STAGE HIGH-PRESSURE TURBINE-PART III: IMPACT OF HOT STREAK CHARACTERISTICS ON BLADE ROW HEAT FLUX." in ASME Turbo Expo 2010. (1 2010).
  • Mathison, R.M., Haldeman, C.W., and Dunn, M.G. "Aerodynamics and Heat Transfer for a Cooled One and One-Half Stage High-Pressure Turbine: Part III—Impact of Hot Streak Characteristics on Blade Row Heat Flux." in ASME Turbo Expo. (6 2010).
  • Mathison, R.M.; Haldeman, C.W.; Dunn, M.G.; ASME, "HEAT TRANSFER FOR THE BLADE OF A COOLED STAGE AND ONE-HALF HIGH-PRESSURE TURBINE, PART I: INFLUENCE OF COOLING VARIATION." (1 2010).
  • Mathison, R.M., Wishart, M.B., Haldeman, C.W., and Dunn, M.G. "Temperature Predictions and Comparison with Measurements for the Blade Leading Edge and Platform of a 1-1/2 Stage Transonic HP Turbine." in ASME Turbo Expo. (6 2010).
  • Haldeman, C.W.; Dunn, M.G.; Mathison, R.M. "Fully-Cooled Single Stage HP Transonic Turbine: Part II - Influence of Cooling Mass Flow Changes and Inlet Temperature Profiles on Blade and Shroud Heat-transfer." in ASME Turbo Expo 2010. (1 2010).
  • Haldeman, C.W.; Dunn, M.G.; Mathison, R.M. "Fully-Cooled Single Stage HP Transonic Turbine: Part I - Influence of Cooling Mass Flow Variations and Inlet Temperature Profiles on Blade Internal and External Aerodynamics." in ASME Turbo Expo 2010. (1 2010).

2006

  • Southworth, S., Harral, J.W., Haldeman, C.W., Mathison, R.M., Dunn, M.G., and Heitland, G. "Aerodynamic and Heat Flux Measurements in a Single Stage Fully Cooled Turbine: Part I — Experimental Approach." in ASME Turbo Expo. (6 2006).
  • Haldeman, C.W., Mathison, R.M., Dunn, M.G., Southworth, S., Harral, J.W., and Heitland, G. "Aerodynamic and Heat Flux Measurements in a Single Stage Fully Cooled Turbine: Part II — Experimental Results." in ASME Turbo Expo. (6 2006).
  • Haldeman, C.W.; Mathison, R.M.; Dunn, M.G.; Southworth, S. et al. "Aerodynamic and heat flux measurements in a single stage fully cooled turbine - Part II: Experimental results." (11 2006).
  • Haldeman, C.W.; Mathison, R.M.; Dunn, M.G.; Southworth, S. et al. "Aerodynamic and heat flux measurements in a single stage fully cooled turbine - Part II: Experimental results." in 51st ASME Turbo Expo. (1 2006).
  • Haldeman, C.W.; Mathison, R.M.; Dunn, M.G.; Southworth, S. et al. "Aerodynamic and heat flux measurements in a single stage fully cooled turbine - Part I: Experimental approach." in 51st ASME Turbo Expo. (1 2006).
  • Haldeman, C.W.; Mathison, R.M.; Dunn, M.G.; Southworth, S. et al. "Aerodynamic and heat flux measurements in a single stage fully cooled turbine - Part I: Experimental approach." (11 2006).
  • Haldeman, C.W.; Mathison, R.M.; Dunn, M.G.; Southworth, S. et al. "Aerodynamic and heat flux measurements in a single stage fully cooled turbine - Part I: Experimental approach." (1 2006).
  • Haldeman, C.W.; Mathison, R.M.; Dunn, M.G.; Southworth, S. et al. "Aerodynamic and heat flux measurements in a single stage fully cooled turbine - Part II: Experimental results." (1 2006).

2004

  • Haldeman, CW, Mathison, RM, Dunn, MG "Design, Construction, and Operation of a Combustor Emulator for Short-Duration High-Pressure Turbine Experiments." in 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. (7 2004).
  • Mathison, R.M., Dunn, M.G., Weaver, M.M., and Dushko, A. "Measurement of Air Film Damping Effectiveness." (6 2004).
  • Mathison, R.M.; Dunn, M.G.; Weaver, M.M.; Dushko, A. "Measurement of air film damping effectiveness." (12 2004).

Unknown

  • Mathison, RS and Dunn, MG "A New Rotating Facility for Investigating Cooling Passage Internal Heat Transfer." in Global Power and Propulsion Forum.